23 open source boards using the OPA320AIDBVR
Real designs built with the OPA320AIDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sun sensor
vatsalbansal123
26 × 19 mm25 parts2LNo license2ESP8266
CA6
mribble
101.6 × 162.6 mm183 parts4LNo license1ESP32
Glove v4-routing candidate
latintzar
100 × 80 mm561 parts8LMIT0RP2040/RP2350
Rf switchboard
Erhannis
100 × 174.6 mm463 parts4LNo license0STM32
NexRx
alanmimms
99 × 99 mm356 parts6LMIT0Polarimeter
HearnChristian
99.7 × 74.5 mm65 parts4LNo license0PD detector pro
Samuel20040521
21 × 51 mm40 parts2LNo license0ESP8266
CA6x
mribble
101.6 × 162.6 mm183 parts4LNo license1ESP32
Glove v4-placement
latintzar
100 × 80 mm560 parts6LMIT0RP2040/RP2350
Pico flicker shield
Samuel20040521
128.7 × 75.4 mm26 parts2LNo license0Output
anton-pt
44.9 × 34.9 mm14 parts2LMIT0AVR/Arduino
CAFlash
mribble
86.4 × 86.4 mm72 parts2LNo license1Raspberry Pi
Fsoc rx
SharbelMarshi
52.1 × 40 mm70 parts4LNo license1Nordic nRF
Glove v3-routed
latintzar
90 × 60 mm356 parts4LMIT0SOC Final
Samuel20040521
22.9 × 17.6 mm23 parts2LNo license0Fsoc rx panel
SharbelMarshi
104.2 × 90 mm70 parts4LNo license1Projectile
mribble
108.7 × 45.7 mm35 parts2LNo license1Nordic nRF
Glove v3-floorplan
latintzar
70 × 46 mm333 parts4LMIT0Nordic nRF
Glove v3-grouped
latintzar
90 × 60 mm330 parts4LMIT0Light
mribble
63.5 × 33 mm17 parts2LNo license1Sound
mribble
50.8 × 20.3 mm14 parts2LNo license1ESP8266
ESP8266card
mribble
45.7 × 36.8 mm13 parts2LNo license1NRF52card
mribble
45.7 × 36.8 mm7 parts2LNo license1
How designs wire the OPA320AIDBVR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the OPA320AIDBVR connects to, and the resistors, capacitors and other passives placed on it.
- The V+_5 pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 1 µF).
- The V-_2 pin is tied to GND on 8 of 9 designs.
- The OUT_1 pin has a series resistor on 6 of 9 designs, most often 10 kΩ (then 3.3 kΩ).
- The -IN_4 pin has a series resistor on 6 of 9 designs, most often 3.3 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUT_1pin 1 | Connected to: Signal 78% |
|
| V-_2pin 2 | Connected to: GND 89% | — |
| +IN_3pin 3 | Connected to: Signal 78% |
|
| -IN_4pin 4 | Connected to: Signal 100% |
|
| V+_5pin 5 | Connected to: 3.3V 78% · a signal 22% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sun sensor pcb by vatsalbansal123, CA6 by mribble, Fsoc rx by SharbelMarshi and NexRx by alanmimms.
The OPA320AIDBVR in open source designs
The gallery holds 23 open source boards using the OPA320AIDBVR from 9 GitHub repositories; a typical one measures about 90 × 60 mm and carries around 70 components.
52% use four copper layers or more, and 30% carry an open source license.
The most starred is Sun sensor pcb by vatsalbansal123.
Parts used alongside the OPA320AIDBVR
Microcontrollers on boards using the OPA320AIDBVR
What boards using the OPA320AIDBVR are built for
OPA320AIDBVR: common questions
Where can I find a OPA320AIDBVR reference design?
Each of the 23 boards on this page is a real design using the OPA320AIDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the OPA320AIDBVR V+_5 pin?
The V+_5 pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the OPA320AIDBVR.
How is the OPA320AIDBVR V-_2 pin connected?
The V-_2 pin is tied to GND on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the OPA320AIDBVR.
What resistor goes on the OPA320AIDBVR OUT_1 pin?
The OUT_1 pin has a series resistor on 6 of 9 designs, most often 10 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 9 open source designs using the OPA320AIDBVR.
Which microcontrollers do boards using the OPA320AIDBVR use?
Most are built on Nordic nRF (3), ESP8266 (3), RP2040/RP2350 (2) and ESP32 (2).
How big is a typical board using the OPA320AIDBVR?
The median is 90 × 60 mm, and 48% are two-layer designs.
What is the most popular open source board using the OPA320AIDBVR?
By GitHub stars, Sun sensor pcb by vatsalbansal123, with 2 stars.
Can I simulate one of these boards using the OPA320AIDBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.