5 open source boards using the OPA454
Real designs built with the OPA454, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
OpenXstim
MonzurulAlam
69 × 53.7 mm55 parts2LNo license5STM32G474-Precision-Lab-Power-Supply
Aleksei327
185.5 × 115.3 mm204 parts2LCC-BY-NC-4.04Box0-hv analog breakoutboard
riktw
70 × 50 mm57 parts2LNo license3STM32G474-Precision-Lab-Power-Supply
nikunjmalik306
185.5 × 115.3 mm204 parts2LNo license0AVR/Arduino
OpenExoStim
MonzurulAlam
69 × 53.7 mm49 parts2LNo license5
The OPA454 in open source designs
The gallery holds 5 open source boards using the OPA454 from 4 GitHub repositories; a typical one measures about 70 × 53.7 mm and carries around 57 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is OpenXstim by MonzurulAlam.
Parts used alongside the OPA454
Microcontrollers on boards using the OPA454
What boards using the OPA454 are built for
OPA454: common questions
Where can I find a OPA454 reference design?
Each of the 5 boards on this page is a real design using the OPA454. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the OPA454?
The DAC8830, INA228, MP9486A, PAM8403 and PC817 appear in the most repositories here.
Which microcontrollers do boards using the OPA454 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the OPA454?
The median is 70 × 53.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the OPA454?
By GitHub stars, OpenXstim by MonzurulAlam, with 5 stars.
Can I simulate one of these boards using the OPA454 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.