7 open source boards using the RCLAMP0504FBTCT
Real designs built with the RCLAMP0504FBTCT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OreSat Star Tracker Card
oresat
99.8 × 94.6 mm163 parts4LNo license49OreSat GPS Card
oresat
99.8 × 94.6 mm210 parts4LCERN-OHL-S-2.034Oresat c3-hardware
oresat
99.8 × 94.6 mm347 parts4LCERN-OHL-S-2.026OreSat Live Card
oresat
99.8 × 94.6 mm314 parts4LGPL-3.017OreSat CFC Processor Card
oresat
99.8 × 94.6 mm163 parts4LCERN-OHL-S-2.02Oresat c3
SkCubeSat
90.2 × 95.9 mm128 parts4LNo license2- schematic only · 503 parts
Hwsec netlist scanner
srisowmya2000
503 partsNo license0
How designs wire the RCLAMP0504FBTCT
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the RCLAMP0504FBTCT connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_5 pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 22 µF).
- The I4_6 pin is left unconnected on 5 of 6 designs.
- The I3_4 pin has a pull-up to 3.3V on 3 of 6 designs, most often 10 kΩ.
- The I3_4 pin has a capacitor to GND on 3 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| I1_1pin 1 | Connected to: A connector 83%, OSD3358-1G-ISM 50%, OSD3358-512M-BSM 33% |
|
| GND_2pin 2 | Connected to: GND 100% | — |
| I3_4pin 4 | Connected to: SN74AUC1G07DCKR 50%, OSD3358-1G-ISM 33%, OSD3358-512M-BSM 33% · not connected 33% |
|
| VCC_5pin 5 | Connected to: VIN_USB 50% · a signal 50% |
|
| I4_6pin 6 | Connected to: Not connected 83% · a signal 17% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OreSat Star Tracker Card by oresat, OreSat GPS Card by oresat, Oresat c3-hardware by oresat and OreSat Live Card by oresat.
The RCLAMP0504FBTCT in open source designs
The gallery holds 7 open source boards using the RCLAMP0504FBTCT from 7 GitHub repositories; a typical one measures about 99.8 × 94.6 mm and carries around 210 components.
100% use four copper layers or more, and 57% carry an open source license.
The most starred is OreSat Star Tracker Card by oresat.
Parts used alongside the RCLAMP0504FBTCT
What boards using the RCLAMP0504FBTCT are built for
RCLAMP0504FBTCT: common questions
Where can I find a RCLAMP0504FBTCT reference design?
Each of the 7 boards on this page is a real design using the RCLAMP0504FBTCT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the RCLAMP0504FBTCT VCC_5 pin connected?
The VCC_5 pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 6 open source designs using the RCLAMP0504FBTCT.
How is the RCLAMP0504FBTCT I4_6 pin connected?
The I4_6 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the RCLAMP0504FBTCT.
What pull-up resistor is used on the RCLAMP0504FBTCT I3_4 pin?
The I3_4 pin has a pull-up to 3.3V on 3 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the RCLAMP0504FBTCT.
What parts are used alongside the RCLAMP0504FBTCT?
The SN74AUC1G07DCKR, LTC3624IDD-5#PBF, MIC842LYC5-TR, TLVH431BCDBZT and TS5A21366DCUR appear in the most repositories here.
How big is a typical board using the RCLAMP0504FBTCT?
The median is 99.8 × 94.6 mm, and 0% are two-layer designs.
What is the most popular open source board using the RCLAMP0504FBTCT?
By GitHub stars, OreSat Star Tracker Card by oresat, with 49 stars.
Can I simulate one of these boards using the RCLAMP0504FBTCT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.