5 open source boards using the PCA9557PW
Real designs built with the PCA9557PW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
EsPiFF
MDCservice
83.5 × 56 mm168 parts6LGPL-3.0224Power extender
StarGate01
90 × 71 mm72 parts2LMIT5BratwurstPower
Qeteshpony
85 × 56 mm123 parts4LBSD-2-Clause1STM32
Grippyboi
gabbla
68 × 100 mm193 parts4LNo license0ESP32
Lacarriere station
pier-cbd
92 × 92 mm78 parts2LNo license0
How designs wire the PCA9557PW
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the PCA9557PW connects to, and the resistors, capacitors and other passives placed on it.
- The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 2.2 kΩ (then 10 kΩ).
- The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 2.2 kΩ (then 10 kΩ).
- The IO5 pin has a series resistor on 4 of 5 designs, most often 3.3 kΩ (then 1 kΩ).
- The IO6 pin has a series resistor on 4 of 5 designs, most often 3.3 kΩ (then 200 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCLpin 1 | Connected to: A connector 60%, the microcontroller 60% |
|
| SDApin 2 | Connected to: A connector 60%, the microcontroller 60% |
|
| A0pin 3 | Connected to: GND 80% · 3.3V 20% | — |
| A1pin 4 | Connected to: GND 80% · 3.3V 20% | — |
| A2pin 5 | Connected to: GND 80% · 3.3V 20% | — |
| IO0pin 6 | Connected to: Signal 100% |
|
| IO1pin 7 | Connected to: A connector 40% |
|
| VSSpin 8 | Connected to: GND 100% | — |
| IO4pin 11 | Connected to: Signal 80% · not connected 20% |
|
| IO5pin 12 | Connected to: Signal 100% |
|
| IO6pin 13 | Connected to: Signal 100% |
|
| IO7pin 14 | Connected to: Signal 100% |
|
| RESETpin 15 | Connected to: Signal 80% · 3.3V 20% |
|
| VDDpin 16 | Connected to: 3.3V 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EsPiFF by MDCservice, Power extender by StarGate01, BratwurstPower by Qeteshpony and Grippyboi by gabbla.
The PCA9557PW in open source designs
The gallery holds 5 open source boards using the PCA9557PW from 5 GitHub repositories; a typical one measures about 85 × 71 mm and carries around 123 components.
60% use four copper layers or more, and 60% carry an open source license.
The most starred is EsPiFF by MDCservice.
Parts used alongside the PCA9557PW
What boards using the PCA9557PW are built for
PCA9557PW: common questions
Where can I find a PCA9557PW reference design?
Each of the 5 boards on this page is a real design using the PCA9557PW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the PCA9557PW SCL pin?
The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 2.2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the PCA9557PW.
What pull-up resistor is used on the PCA9557PW SDA pin?
The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 2.2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the PCA9557PW.
What resistor goes on the PCA9557PW IO5 pin?
The IO5 pin has a series resistor on 4 of 5 designs, most often 3.3 kΩ (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the PCA9557PW.
Which microcontrollers do boards using the PCA9557PW use?
Most are built on ESP32 (2) and STM32 (1).
How big is a typical board using the PCA9557PW?
The median is 85 × 71 mm, and 40% are two-layer designs.
What is the most popular open source board using the PCA9557PW?
By GitHub stars, EsPiFF by MDCservice, with 224 stars.
Can I simulate one of these boards using the PCA9557PW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.