14 open source boards using the PCF8563T/5,518

Real designs built with the PCF8563T/5,518, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the PCF8563T/5,518

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the PCF8563T/5,518 connects to, and the resistors, capacitors and other passives placed on it.

  • The OSCO_2 pin has a crystal on 9 of 9 designs, most often 32.768 kHz (then 32 kHz).
  • The OSCI pin has a crystal on 8 of 9 designs, most often 32.768 kHz.
  • The SDA_5 pin has a pull-up to 3.3V on 8 of 9 designs, most often 4.7 kΩ (then 3.3 kΩ).
  • The SCL_6 pin has a pull-up to 3.3V on 8 of 9 designs, most often 4.7 kΩ (then 3.3 kΩ).
OSCIpin 1Connected to: Signal 89%
  • Crystal on 89% · 32.768 kHz (5)
  • Capacitor to GND on 56% · 24 pF (1), 22 pF (1)
OSCO_2pin 2Connected to: Signal 100%
  • Crystal on 100% · 32.768 kHz (5), 32 kHz (1)
  • Capacitor to GND on 33% · 22 pF (2), 24 pF (1)
VSS_4pin 4Connected to: GND 100%
SDA_5pin 5Connected to: A connector 56%, the microcontroller 33%
  • Pull-up to 3.3V on 89% · 4.7 kΩ (4), 3.3 kΩ (1), 10 kΩ (1)
SCL_6pin 6Connected to: A connector 56%, the microcontroller 33%
  • Pull-up to 3.3V on 89% · 4.7 kΩ (4), 3.3 kΩ (1), 10 kΩ (1)
CLKOUT_7pin 7Connected to: Not connected 89%
VDD_8pin 8Connected to: Signal 89%
  • Capacitor to GND on 67% · 100 nF (7), 1 µF (1)
  • Series resistor on 44% · 0 Ω (2), 1 MΩ (2), 20 kΩ (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PocketLab-Card by Jebroa774, Grupparbete-IoT25S by rt-rtos, Trq21-replacement pcb by slaesh and Capcore by alph4345.

The PCF8563T/5,518 in open source designs

The gallery holds 14 open source boards using the PCF8563T/5,518 from 10 GitHub repositories; a typical one measures about 85.6 × 57 mm and carries around 74 components.

57% use four copper layers or more, and 7% carry an open source license.

The most starred is PocketLab-Card by Jebroa774.

Parts used alongside the PCF8563T/5,518

Microcontrollers on boards using the PCF8563T/5,518

PCF8563T/5,518: common questions

Where can I find a PCF8563T/5,518 reference design?

Each of the 14 boards on this page is a real design using the PCF8563T/5,518. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PCF8563T/5,518 OSCO_2 pin connected?

The OSCO_2 pin has a crystal on 9 of 9 designs, most often 32.768 kHz (then 32 kHz). Counted from the KiCad layouts of 9 open source designs using the PCF8563T/5,518.

How is the PCF8563T/5,518 OSCI pin connected?

The OSCI pin has a crystal on 8 of 9 designs, most often 32.768 kHz. Counted from the KiCad layouts of 9 open source designs using the PCF8563T/5,518.

What pull-up resistor is used on the PCF8563T/5,518 SDA_5 pin?

The SDA_5 pin has a pull-up to 3.3V on 8 of 9 designs, most often 4.7 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 9 open source designs using the PCF8563T/5,518.

Which microcontrollers do boards using the PCF8563T/5,518 use?

Most are built on ESP32 (6), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the PCF8563T/5,518?

The median is 85.6 × 57 mm, and 43% are two-layer designs.

What is the most popular open source board using the PCF8563T/5,518?

By GitHub stars, PocketLab-Card by Jebroa774, with 2 stars.

Can I simulate one of these boards using the PCF8563T/5,518 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part