5 open source boards using the PCM1808

Real designs built with the PCM1808, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the PCM1808

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the PCM1808 connects to, and the resistors, capacitors and other passives placed on it.

  • The VINL pin has a series capacitor on 3 of 5 designs, most often 10 µF (then 100 pF).
  • The GND pin is tied to 3.3V on 3 of 5 designs.
  • The VREF pin has a capacitor to GND on 2 of 5 designs, most often 100 nF (then 10 µF).
  • The VCC pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF (then 10 µF).
VREFpin 1Connected to: Signal 40% · not connected 20% · GND 20% · VREF 20%
  • Capacitor to GND on 40% · 100 nF (2), 10 µF (1)
AGNDpin 2Connected to: GND 80% · not connected 20%
VCCpin 3Connected to: 5V 60% · not connected 20% · GND 20%
  • Decoupling capacitor on 40% · 100 nF (2), 10 µF (1)
GNDpin 4Connected to: 3.3V 60% · not connected 20% · GND 20%
DGNDpin 5Connected to: GND 60% · 3.3V 40%
SCKIpin 6Connected to: Signal 60% · 5V 40%
  • Series resistor on 40% · 100 Ω (1), 22 Ω (1)
LRCKpin 7Connected to: Signal 60% · 3.3V 40%
  • Series resistor on 40% · 100 Ω (1), 22 Ω (1)
BCKpin 8Connected to: Signal 60% · GND 40%
  • Series resistor on 40% · 100 Ω (1), 22 Ω (1)
DOUTpin 9Connected to: The microcontroller 40%
  • Series resistor on 40% · 100 Ω (1), 22 Ω (1)
VINLpin 13Connected to: Signal 80% · VINL 20%
  • Series capacitor on 60% · 10 µF (2), 100 pF (1)
RINpin 15Connected to: Signal 100%
  • Series capacitor on 100% · 100 pF (1), 10 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Control rev3 by PaulStoffregen, RP2040 DSP Modular by DMME-NL, HyperNet-V2-ADC by TheStaticTurtle and Guitardawliteos by ArdChoille637.

The PCM1808 in open source designs

The gallery holds 5 open source boards using the PCM1808 from 5 GitHub repositories; a typical one measures about 53 × 92.6 mm and carries around 96 components.

100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Control rev3 by PaulStoffregen.

Microcontrollers on boards using the PCM1808

What boards using the PCM1808 are built for

PCM1808: common questions

Where can I find a PCM1808 reference design?

Each of the 5 boards on this page is a real design using the PCM1808. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PCM1808 VINL pin connected?

The VINL pin has a series capacitor on 3 of 5 designs, most often 10 µF (then 100 pF). Counted from the KiCad layouts of 5 open source designs using the PCM1808.

How is the PCM1808 GND pin connected?

The GND pin is tied to 3.3V on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the PCM1808.

How is the PCM1808 VREF pin connected?

The VREF pin has a capacitor to GND on 2 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the PCM1808.

Which microcontrollers do boards using the PCM1808 use?

Most are built on RP2040/RP2350 (2) and NXP (1).

How big is a typical board using the PCM1808?

The median is 53 × 92.6 mm, and 100% are two-layer designs.

What is the most popular open source board using the PCM1808?

By GitHub stars, Control rev3 by PaulStoffregen, with 160 stars.

Can I simulate one of these boards using the PCM1808 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part