5 open source boards using the PIC18F4550-IP

Real designs built with the PIC18F4550-IP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the PIC18F4550-IP

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the PIC18F4550-IP connects to, and the resistors, capacitors and other passives placed on it.

  • The RA6/OSC2/CLKO pin has a crystal on 5 of 5 designs, most often 20 MHz.
  • The OSC1/CLKI pin has a capacitor to GND on 4 of 5 designs, most often 15 pF (then 22 pF).
  • The OSC1/CLKI pin has a crystal on 4 of 5 designs, most often 20 MHz.
  • The RA6/OSC2/CLKO pin has a capacitor to GND on 4 of 5 designs, most often 15 pF (then 22 pF).
VPP/MCLR/RE3pin 1Connected to: A connector 80% · not connected 20%
  • Pull-up to VCC on 40% · 10 kΩ (2)
VDDpin 11, 32Connected to: VCC 80% · a signal 20%
  • Decoupling capacitor on 40% · 100 nF (10)
VSSpin 12, 31Connected to: GND 100%
OSC1/CLKIpin 13Connected to: Signal 80% · GND 20%
  • Capacitor to GND on 80% · 15 pF (3), 22 pF (1)
  • Crystal on 80% · 20 MHz (3)
RA6/OSC2/CLKOpin 14Connected to: A connector 40%
  • Crystal on 100% · 20 MHz (3)
  • Capacitor to GND on 80% · 15 pF (3), 22 pF (1)
VUSBpin 18Connected to: Signal 60% · not connected 40%
  • Capacitor to GND on 40% · 47 µF (2)

32 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PIC18F4550-TUTORIAL by WelsTheory, AnalogDrum MIDI by LazareLive, PIC18F4550 by cristobalcuevas and Dspic30f devboard kit by Esdras2.

The PIC18F4550-IP in open source designs

The gallery holds 5 open source boards using the PIC18F4550-IP from 5 GitHub repositories; a typical one measures about 95.5 × 70 mm and carries around 33 components.

100% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is PIC18F4550-TUTORIAL by WelsTheory.

Parts used alongside the PIC18F4550-IP

Microcontrollers on boards using the PIC18F4550-IP

What boards using the PIC18F4550-IP are built for

PIC18F4550-IP: common questions

Where can I find a PIC18F4550-IP reference design?

Each of the 5 boards on this page is a real design using the PIC18F4550-IP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PIC18F4550-IP RA6/OSC2/CLKO pin connected?

The RA6/OSC2/CLKO pin has a crystal on 5 of 5 designs, most often 20 MHz. Counted from the KiCad layouts of 5 open source designs using the PIC18F4550-IP.

How is the PIC18F4550-IP OSC1/CLKI pin connected?

The OSC1/CLKI pin has a capacitor to GND on 4 of 5 designs, most often 15 pF (then 22 pF). Counted from the KiCad layouts of 5 open source designs using the PIC18F4550-IP.

What pull-up resistor is used on the PIC18F4550-IP VPP/MCLR/RE3 pin?

The VPP/MCLR/RE3 pin has a pull-up to VCC on 2 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the PIC18F4550-IP.

Which microcontrollers do boards using the PIC18F4550-IP use?

Most are built on PIC (5).

How big is a typical board using the PIC18F4550-IP?

The median is 95.5 × 70 mm, and 100% are two-layer designs.

What is the most popular open source board using the PIC18F4550-IP?

By GitHub stars, PIC18F4550-TUTORIAL by WelsTheory, with 54 stars.

Can I simulate one of these boards using the PIC18F4550-IP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part