5 open source boards using the RA-01

Real designs built with the RA-01, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the RA-01

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the RA-01 connects to, and the resistors, capacitors and other passives placed on it.

  • The DIO4 pin is left unconnected on 3 of 4 designs.
  • The DIO5 pin is left unconnected on 3 of 4 designs.
  • The VDD pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF (then 10 µF).
GNDpin 2, 9, 16Connected to: GND 69% · a signal 31%
VDDpin 3Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 40% · 100 nF (2), 10 µF (1)
DIO4pin 10Connected to: Not connected 75% · a signal 25%
DIO5pin 11Connected to: Not connected 75% · a signal 25%

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include StratoSoar-MK3.0 by crnicholson, Argo v9-stable rev4 by SensorsINI, Node by stustanet and OpenAV by JIBSIL.

The RA-01 in open source designs

The gallery holds 5 open source boards using the RA-01 from 5 GitHub repositories; a typical one measures about 70.3 × 67.2 mm and carries around 76 components.

80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is StratoSoar-MK3.0 by crnicholson.

Parts used alongside the RA-01

Microcontrollers on boards using the RA-01

What boards using the RA-01 are built for

RA-01: common questions

Where can I find a RA-01 reference design?

Each of the 5 boards on this page is a real design using the RA-01. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RA-01 DIO4 pin connected?

The DIO4 pin is left unconnected on 3 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the RA-01.

How is the RA-01 DIO5 pin connected?

The DIO5 pin is left unconnected on 3 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the RA-01.

What decoupling capacitors do designs use on the RA-01 VDD pin?

The VDD pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the RA-01.

Which microcontrollers do boards using the RA-01 use?

Most are built on ESP32 (2), Microchip SAM (1) and STM32 (1).

How big is a typical board using the RA-01?

The median is 70.3 × 67.2 mm, and 80% are two-layer designs.

What is the most popular open source board using the RA-01?

By GitHub stars, StratoSoar-MK3.0 by crnicholson, with 42 stars.

Can I simulate one of these boards using the RA-01 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part