9 open source boards using the RASPBERRY_PI_5
Real designs built with the RASPBERRY_PI_5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Kin3ct
KavEn06
34.5 × 82 mm5 parts2LNo license7Raspberry Pi
Mothbox 5.0.4
Digital-Naturalism-Laboratories
237 × 139 mm159 parts2LMIT2ESP32
RX8-7(Finished BeforeESPChange)
bradport02
165.3 × 123.7 mm407 parts4LNo license0- schematic only · 50 partsRaspberry Pi
Robot hexapode
lucas-minaberry
50 partsCustom license0 - schematic only · 26 partsESP32
Elettrica-VS
norcenw
26 partsNo license0 Raspberry Pi
Mothbox 5.0.6
Digital-Naturalism-Laboratories
237 × 139.1 mm159 parts2LMIT2ESP32
RX8-7
bradport02
165.3 × 123.7 mm401 parts4LNo license0ESP32
RX8-7(WithoutOpAmps)
bradport02
165.3 × 123.7 mm388 parts4LNo license0ESP32
RX8-7(STM CENTRE)
bradport02
165.3 × 123.7 mm384 parts4LNo license0
The RASPBERRY_PI_5 in open source designs
The gallery holds 9 open source boards using the RASPBERRY_PI_5 from 5 GitHub repositories; a typical one measures about 165.3 × 123.7 mm and carries around 159 components.
57% use four copper layers or more, and 22% carry an open source license.
The most starred is Kin3ct by KavEn06.
Microcontrollers on boards using the RASPBERRY_PI_5
What boards using the RASPBERRY_PI_5 are built for
RASPBERRY_PI_5: common questions
Where can I find a RASPBERRY_PI_5 reference design?
Each of the 9 boards on this page is a real design using the RASPBERRY_PI_5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the RASPBERRY_PI_5 use?
Most are built on ESP32 (5) and Raspberry Pi (4).
How big is a typical board using the RASPBERRY_PI_5?
The median is 165.3 × 123.7 mm, and 43% are two-layer designs.
What is the most popular open source board using the RASPBERRY_PI_5?
By GitHub stars, Kin3ct by KavEn06, with 7 stars.
Can I simulate one of these boards using the RASPBERRY_PI_5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.