3 open source boards using the RP2350A_C42411118
Real designs built with the RP2350A_C42411118, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Multiprobe
picolemon
50 × 50 mm89 parts4LMIT13RP2040/RP2350
Lightwolf
wolf-yuan-6115
21 × 51 mm46 parts4LGPL-3.01RP2040/RP2350
Peripheral board v1a
BroncoSpace-Lab
100.2 × 100.1 mm171 parts6LNo license6
The RP2350A_C42411118 in open source designs
The gallery holds 3 open source boards using the RP2350A_C42411118 from 3 GitHub repositories; a typical one measures about 50 × 51 mm and carries around 89 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is Multiprobe by picolemon.
Parts used alongside the RP2350A_C42411118
Microcontrollers on boards using the RP2350A_C42411118
RP2350A_C42411118: common questions
Where can I find a RP2350A_C42411118 reference design?
Each of the 3 boards on this page is a real design using the RP2350A_C42411118. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the RP2350A_C42411118 use?
Most are built on RP2040/RP2350 (3).
How big is a typical board using the RP2350A_C42411118?
The median is 50 × 51 mm, and 0% are two-layer designs.
What is the most popular open source board using the RP2350A_C42411118?
By GitHub stars, Multiprobe by picolemon, with 13 stars.
Can I simulate one of these boards using the RP2350A_C42411118 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.