3 open source boards using the S1216V8
Real designs built with the S1216V8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Mainboard before drastic
Sierra-Lobo
90.2 × 101.1 mm353 parts6LCC-BY-SA-4.01- schematic only · 369 partsRaspberry Pi
PiCubed
NeilKhera
369 parts2LNo license0 Microchip SAM
Mainboard
Sierra-Lobo
90.2 × 101.1 mm312 parts6LCC-BY-SA-4.01
The S1216V8 in open source designs
The gallery holds 3 open source boards using the S1216V8 from 2 GitHub repositories; a typical one measures about 90.2 × 101.1 mm and carries around 353 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is Mainboard before drastic by Sierra-Lobo.
Parts used alongside the S1216V8
Microcontrollers on boards using the S1216V8
What boards using the S1216V8 are built for
S1216V8: common questions
Where can I find a S1216V8 reference design?
Each of the 3 boards on this page is a real design using the S1216V8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the S1216V8?
The EP2W+, PE014006 TE and RFM98PW appear in the most repositories here.
Which microcontrollers do boards using the S1216V8 use?
Most are built on Microchip SAM (2) and Raspberry Pi (1).
How big is a typical board using the S1216V8?
The median is 90.2 × 101.1 mm, and 33% are two-layer designs.
What is the most popular open source board using the S1216V8?
By GitHub stars, Mainboard before drastic by Sierra-Lobo, with 1 stars.
Can I simulate one of these boards using the S1216V8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.