6 open source boards using the PE014006 TE
Real designs built with the PE014006 TE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Mainboard before drastic
Sierra-Lobo
90.2 × 101.1 mm353 parts6LCC-BY-SA-4.01Microchip SAM
Mainboard
alxklso
90.2 × 95.9 mm196 parts4LMIT1- schematic only · 369 partsRaspberry Pi
PiCubed
NeilKhera
369 parts2LNo license0 RP2040/RP2350
PiCubed
stanford-ssi
90.2 × 95.9 mm176 parts4LNo license13Microchip SAM
Mainboard
Sierra-Lobo
90.2 × 101.1 mm312 parts6LCC-BY-SA-4.01RP2040/RP2350
Mainboard
pete4radio
90.2 × 95.9 mm175 parts4LNo license0
The PE014006 TE in open source designs
The gallery holds 6 open source boards using the PE014006 TE from 5 GitHub repositories; a typical one measures about 90.2 × 95.9 mm and carries around 254 components.
83% use four copper layers or more, and 50% carry an open source license.
The most starred is PiCubed by stanford-ssi.
Parts used alongside the PE014006 TE
Microcontrollers on boards using the PE014006 TE
What boards using the PE014006 TE are built for
PE014006 TE: common questions
Where can I find a PE014006 TE reference design?
Each of the 6 boards on this page is a real design using the PE014006 TE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the PE014006 TE?
The RFM98PW, ADM1176-1ARMZ-R7, BQ25883RGER, TPS54226PWPR and TPS7A4501DCQT appear in the most repositories here.
Which microcontrollers do boards using the PE014006 TE use?
Most are built on Microchip SAM (3), RP2040/RP2350 (2) and Raspberry Pi (1).
How big is a typical board using the PE014006 TE?
The median is 90.2 × 95.9 mm, and 17% are two-layer designs.
What is the most popular open source board using the PE014006 TE?
By GitHub stars, PiCubed by stanford-ssi, with 13 stars.
Can I simulate one of these boards using the PE014006 TE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.