4 open source boards using the SC189ZSKTRT
Real designs built with the SC189ZSKTRT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
NeuraCore
NeuraCoreTech
120 × 60 mm295 parts8LNo license0FPGA
Zulu A7
tambechristian
69.9 × 25.4 mm177 parts6LCustom license0Raspberry Pi
Voltastream0
JulianVolodia
65 × 30 mm116 parts4LCC-BY-NC-4.00- schematic only · 141 partsESP32
MP3-Gotchi v2
Artisfera
141 partsAGPL-3.00
The SC189ZSKTRT in open source designs
The gallery holds 4 open source boards using the SC189ZSKTRT from 4 GitHub repositories; a typical one measures about 69.8 × 30 mm and carries around 159 components.
100% use four copper layers or more, and 25% carry an open source license.
The most starred is NeuraCore-PCB by NeuraCoreTech.
Parts used alongside the SC189ZSKTRT
Microcontrollers on boards using the SC189ZSKTRT
What boards using the SC189ZSKTRT are built for
SC189ZSKTRT: common questions
Where can I find a SC189ZSKTRT reference design?
Each of the 4 boards on this page is a real design using the SC189ZSKTRT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SC189ZSKTRT use?
Most are built on FPGA (2), ESP32 (1) and Raspberry Pi (1).
How big is a typical board using the SC189ZSKTRT?
The median is 69.8 × 30 mm, and 0% are two-layer designs.
What is the most popular open source board using the SC189ZSKTRT?
By GitHub stars, NeuraCore-PCB by NeuraCoreTech, with 0 stars.
Can I simulate one of these boards using the SC189ZSKTRT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.