2 open source boards using the Servo Connection Block
Real designs built with the Servo Connection Block, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoCapillary-Tube-Valve-Switch
cegly2444
65 × 95 mm6 parts2LNo license0
AVR/ArduinoTubePinchValve
kcsmith-uiuc
65 × 95 mm6 parts2LNo license0
The Servo Connection Block in open source designs
The gallery holds 2 open source boards using the Servo Connection Block from 2 GitHub repositories; a typical one measures about 65 × 95 mm and carries around 6 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is TubePinchValve by kcsmith-uiuc.
Parts used alongside the Servo Connection Block
Microcontrollers on boards using the Servo Connection Block
What boards using the Servo Connection Block are built for
Servo Connection Block: common questions
Where can I find a Servo Connection Block reference design?
Each of the 2 boards on this page is a real design using the Servo Connection Block. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the Servo Connection Block?
The Arduino_UNO_R3, SPST and Switch appear in the most repositories here.
Which microcontrollers do boards using the Servo Connection Block use?
Most are built on AVR/Arduino (2).
How big is a typical board using the Servo Connection Block?
The median is 65 × 95 mm, and 100% are two-layer designs.
What is the most popular open source board using the Servo Connection Block?
By GitHub stars, TubePinchValve by kcsmith-uiuc, with 0 stars.
Can I simulate one of these boards using the Servo Connection Block before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.