11 open source boards using the SGTL5000XNLA3
Real designs built with the SGTL5000XNLA3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
ReDIP-64
daglem
25.4 × 50.8 mm137 parts6LNo license20NXP
TeensyRPR
RobustRobby
48 × 59.5 mm58 parts2LGPL-3.017Radiohat 2.0 Preliminary (not a Hat)
mpvano
85 × 56 mm153 parts4LMIT2STM32
Pojet 1A
Kennystflr
60 × 60 mm97 parts4LNo license2NXP
Body
mattybrad
90 × 120 mm289 parts4LNo license1STM32
Audio-DSP-Guitar-Pedal
Jonkaphi
136 × 186 mm260 parts4LNo license0STM32
Audio dsp board
cddelong6626
65 × 44.8 mm58 parts4LNo license0NXP
Body2
mattybrad
90 × 95 mm180 parts4LNo license1NXP
TouchDrum
JoelEB
100 × 100 mm140 parts4LNo license0STM32
Audio
ArgonautGit
30 × 30 mm20 parts2LNo license0STM32
Audio c
ArgonautGit
9.5 × 38 mm20 parts2LNo license0
How designs wire the SGTL5000XNLA3
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the SGTL5000XNLA3 connects to, and the resistors, capacitors and other passives placed on it.
- The VAG pin has a capacitor to GND on 9 of 9 designs, most often 100 nF (then 150 nF).
- The VDDA pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 2.2 µF).
- The VDDD pin has a decoupling capacitor on 7 of 9 designs, most often 1 µF (then 100 nF).
- The VDDIO pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDApin 3 | Connected to: 3.3V 44% · a signal 44% |
|
| VAGpin 5 | Connected to: Signal 89% |
|
| LINEOUT_Rpin 6 | Connected to: Signal 56% · not connected 44% |
|
| LINEOUT_Lpin 7 | Connected to: Signal 56% · not connected 33% |
|
| LINEIN_Rpin 8 | Connected to: Signal 67% · not connected 33% |
|
| LINEIN_Lpin 9 | Connected to: Signal 78% · not connected 22% |
|
| MICpin 10 | Connected to: Not connected 44% · a signal 44% |
|
| MIC_BIASpin 11 | Connected to: Not connected 44% · a signal 44% |
|
| VDDIOpin 12 | Connected to: 3.3V 89% |
|
| SYS_MCLKpin 13 | Connected to: The microcontroller 44% |
|
| CTRL_DATApin 18 | Connected to: The microcontroller 60%, a connector 20% |
|
| CTRL_CLKpin 19 | Connected to: The microcontroller 60%, a connector 20% |
|
| VDDDpin 20 | Connected to: 1.8V 90% |
|
| GNDpin 21 | Connected to: GND 90% | — |
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ReDIP-64 by daglem, TeensyRPR by RobustRobby, Pojet 1A by Kennystflr and Radiohat 2.0 Preliminary (not a Hat) by mpvano.
The SGTL5000XNLA3 in open source designs
The gallery holds 11 open source boards using the SGTL5000XNLA3 from 9 GitHub repositories; a typical one measures about 65 × 59.5 mm and carries around 137 components.
73% use four copper layers or more, and 18% carry an open source license.
The most starred is ReDIP-64 by daglem.
Parts used alongside the SGTL5000XNLA3
What boards using the SGTL5000XNLA3 are built for
SGTL5000XNLA3: common questions
Where can I find a SGTL5000XNLA3 reference design?
Each of the 11 boards on this page is a real design using the SGTL5000XNLA3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SGTL5000XNLA3 VAG pin connected?
The VAG pin has a capacitor to GND on 9 of 9 designs, most often 100 nF (then 150 nF). Counted from the KiCad layouts of 9 open source designs using the SGTL5000XNLA3.
What decoupling capacitors do designs use on the SGTL5000XNLA3 VDDA pin?
The VDDA pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 9 open source designs using the SGTL5000XNLA3.
What decoupling capacitors do designs use on the SGTL5000XNLA3 VDDD pin?
The VDDD pin has a decoupling capacitor on 7 of 9 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the SGTL5000XNLA3.
Which microcontrollers do boards using the SGTL5000XNLA3 use?
Most are built on STM32 (5), NXP (4) and FPGA (1).
How big is a typical board using the SGTL5000XNLA3?
The median is 65 × 59.5 mm, and 27% are two-layer designs.
What is the most popular open source board using the SGTL5000XNLA3?
By GitHub stars, ReDIP-64 by daglem, with 20 stars.
Can I simulate one of these boards using the SGTL5000XNLA3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.