3 open source boards using the SIP32510DT-T1-GE3

Real designs built with the SIP32510DT-T1-GE3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The SIP32510DT-T1-GE3 in open source designs

The gallery holds 3 open source boards using the SIP32510DT-T1-GE3 from 3 GitHub repositories; a typical one measures about 102.2 × 83.8 mm and carries around 109 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is Ss main board by loopj.

Microcontrollers on boards using the SIP32510DT-T1-GE3

What boards using the SIP32510DT-T1-GE3 are built for

SIP32510DT-T1-GE3: common questions

Where can I find a SIP32510DT-T1-GE3 reference design?

Each of the 3 boards on this page is a real design using the SIP32510DT-T1-GE3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SIP32510DT-T1-GE3 use?

Most are built on AVR/Arduino (1) and FPGA (1).

How big is a typical board using the SIP32510DT-T1-GE3?

The median is 102.2 × 83.8 mm, and 33% are two-layer designs.

What is the most popular open source board using the SIP32510DT-T1-GE3?

By GitHub stars, Ss main board by loopj, with 802 stars.

Can I simulate one of these boards using the SIP32510DT-T1-GE3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.