9 open source boards using the SN74AHC1G08DCKR
Real designs built with the SN74AHC1G08DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Ovc
osrf
230 × 56 mm379 parts6LApache-2.0207STM32
RT-STACK
fupsrl
150 × 150 mm472 parts6LCC-BY-NC-4.015Trellis core
protolux-electronics
50 × 50 mm84 parts4LCERN-OHL-P-2.010Trellis Core
AnasSarkiz
50 × 50 mm84 parts4LCC-BY-SA-4.00Mobof
osrf
110.5 × 50 mm225 parts6LApache-2.0207Ovc4
osrf
95 × 73 mm180 parts6LApache-2.0207FPGA
HarleyGhostRider
osrf
33.1 × 35.5 mm172 parts10LApache-2.0207HarleyTandemRevB
osrf
237 × 39 mm146 parts6LApache-2.0207HarleyTandem
osrf
237 × 39 mm115 parts6LApache-2.0207
The SN74AHC1G08DCKR in open source designs
The gallery holds 9 open source boards using the SN74AHC1G08DCKR from 4 GitHub repositories; a typical one measures about 110.5 × 50 mm and carries around 172 components.
100% use four copper layers or more, and 89% carry an open source license.
The most starred is Ovc by osrf.
Parts used alongside the SN74AHC1G08DCKR
What boards using the SN74AHC1G08DCKR are built for
SN74AHC1G08DCKR: common questions
Where can I find a SN74AHC1G08DCKR reference design?
Each of the 9 boards on this page is a real design using the SN74AHC1G08DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SN74AHC1G08DCKR?
The T113M4020DC0, TLV62569PDDCR, USBLC6-2SC6 and ZDSD04GLGEAG appear in the most repositories here.
Which microcontrollers do boards using the SN74AHC1G08DCKR use?
Most are built on STM32 (2) and FPGA (1).
How big is a typical board using the SN74AHC1G08DCKR?
The median is 110.5 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74AHC1G08DCKR?
By GitHub stars, Ovc by osrf, with 207 stars.
Can I simulate one of these boards using the SN74AHC1G08DCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.