5 open source boards using the SN74LVC139APWR
Real designs built with the SN74LVC139APWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Mainboard
matgla
100 × 100 mm124 parts4LMIT10RPi-Hat-Thermocouple
mikelawrence
65 × 56 mm40 parts2LMIT9ESP32
Ptz driver
Aottens
100 × 80 mm251 parts4LNo license0RP2040/RP2350
ProtoA
X65
76.8 × 54 mm39 parts4LNo license8ESP32
Rev a input
Aottens
100 × 80 mm251 parts4LNo license0
The SN74LVC139APWR in open source designs
The gallery holds 5 open source boards using the SN74LVC139APWR from 4 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 124 components.
80% use four copper layers or more, and 40% carry an open source license.
The most starred is Mainboard by matgla.
Microcontrollers on boards using the SN74LVC139APWR
What boards using the SN74LVC139APWR are built for
SN74LVC139APWR: common questions
Where can I find a SN74LVC139APWR reference design?
Each of the 5 boards on this page is a real design using the SN74LVC139APWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC139APWR use?
Most are built on ESP32 (2) and RP2040/RP2350 (2).
How big is a typical board using the SN74LVC139APWR?
The median is 100 × 80 mm, and 20% are two-layer designs.
What is the most popular open source board using the SN74LVC139APWR?
By GitHub stars, Mainboard by matgla, with 10 stars.
Can I simulate one of these boards using the SN74LVC139APWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.