4 open source boards using the SN74LVC2T45DCTR
Real designs built with the SN74LVC2T45DCTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Ventilator Main Board
RespiraWorks
350 × 155 mm646 parts4LApache-2.0168ESP32
Endeavour2
petrmikheev
100 × 85 mm263 parts6LGPL-3.049ESP32
PETER
dennowiggle
180 × 110 mm371 parts4LLGPL-2.14RP2040/RP2350
Harp.device.quac
AllenNeuralDynamics
90 × 100 mm276 parts4LMIT0
The SN74LVC2T45DCTR in open source designs
The gallery holds 4 open source boards using the SN74LVC2T45DCTR from 4 GitHub repositories; a typical one measures about 140 × 105 mm and carries around 324 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Ventilator Main Board by RespiraWorks.
Microcontrollers on boards using the SN74LVC2T45DCTR
What boards using the SN74LVC2T45DCTR are built for
SN74LVC2T45DCTR: common questions
Where can I find a SN74LVC2T45DCTR reference design?
Each of the 4 boards on this page is a real design using the SN74LVC2T45DCTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC2T45DCTR use?
Most are built on ESP32 (2), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the SN74LVC2T45DCTR?
The median is 140 × 105 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74LVC2T45DCTR?
By GitHub stars, Ventilator Main Board by RespiraWorks, with 168 stars.
Can I simulate one of these boards using the SN74LVC2T45DCTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.