6 open source boards using the SN74LVCC3245ANSR
Real designs built with the SN74LVCC3245ANSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Nixie-Controller v2
DanielHeEGG
220 × 65 mm201 parts4LCC-BY-SA-4.02CPU 6809 board
roberto314
100 × 100 mm72 parts2LNo license1Z80 schematics
roberto314
100 × 100 mm62 parts2LNo license1Cpu template with buffer
roberto314
100 × 100 mm49 parts2LBSD-2-Clause06502 6800 CPU
roberto314
100 × 100 mm39 parts2LBSD-2-Clause06809 CPU
roberto314
100 × 100 mm39 parts2LBSD-2-Clause0
The SN74LVCC3245ANSR in open source designs
The gallery holds 6 open source boards using the SN74LVCC3245ANSR from 3 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 56 components.
83% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Nixie-Controller v2 by DanielHeEGG.
Parts used alongside the SN74LVCC3245ANSR
Microcontrollers on boards using the SN74LVCC3245ANSR
What boards using the SN74LVCC3245ANSR are built for
SN74LVCC3245ANSR: common questions
Where can I find a SN74LVCC3245ANSR reference design?
Each of the 6 boards on this page is a real design using the SN74LVCC3245ANSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SN74LVCC3245ANSR?
The MC6809E, SN74LVC125AD, SN74LVC245ANSR and XC9572VQ44 appear in the most repositories here.
Which microcontrollers do boards using the SN74LVCC3245ANSR use?
Most are built on ESP32 (1).
How big is a typical board using the SN74LVCC3245ANSR?
The median is 100 × 100 mm, and 83% are two-layer designs.
What is the most popular open source board using the SN74LVCC3245ANSR?
By GitHub stars, Nixie-Controller v2 by DanielHeEGG, with 2 stars.
Can I simulate one of these boards using the SN74LVCC3245ANSR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.