3 open source boards using the SP3485CP
Real designs built with the SP3485CP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
WoMoHome
Sharki-66
138 × 76 mm74 parts2LMIT0ESP32
ESP32PIX
computergeek1507
84.8 × 88.1 mm38 parts2LCERN-OHL-1.210ESP32
WoMoHome ESP Touch LCD 7 HAT
Sharki-66
135 × 77 mm46 parts2LMIT0
The SP3485CP in open source designs
The gallery holds 3 open source boards using the SP3485CP from 2 GitHub repositories; a typical one measures about 135 × 77 mm and carries around 46 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is ESP32PIX by computergeek1507.
Microcontrollers on boards using the SP3485CP
What boards using the SP3485CP are built for
SP3485CP: common questions
Where can I find a SP3485CP reference design?
Each of the 3 boards on this page is a real design using the SP3485CP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SP3485CP use?
Most are built on ESP32 (3).
How big is a typical board using the SP3485CP?
The median is 135 × 77 mm, and 100% are two-layer designs.
What is the most popular open source board using the SP3485CP?
By GitHub stars, ESP32PIX by computergeek1507, with 10 stars.
Can I simulate one of these boards using the SP3485CP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.