7 open source boards using the SSD1306_OLED
Real designs built with the SSD1306_OLED, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 69 partsRP2040/RP2350
Pi-Pico-Random-Looping-Sequencer
DIYSynthMNL
69 partsMIT4 
ESP32Solar Project Rev1
Phil-CIA
100 × 99.9 mm171 parts4LNo license0
ESP32Solar Project Rev0 - Manufactured First Build
100 × 99.9 mm157 parts4LNo license0
ESP32Solar Project Rev1 - 2026-07-27 PCB Baseline
100 × 99.9 mm157 parts4LNo license0
STM32Device
jayis1
85 × 54 mm21 parts4LNo license3
ESP32Solar Project PreRoute save
100 × 100 mm155 parts2LNo license0
Btns
roman-khvatov
40 × 122 mm21 parts2LMIT1
The SSD1306_OLED in open source designs
The gallery holds 7 open source boards using the SSD1306_OLED from 4 GitHub repositories; a typical one measures about 100 × 99.9 mm and carries around 155 components.
67% use four copper layers or more, and 29% carry an open source license.
The most starred is Pi-Pico-Random-Looping-Sequencer by DIYSynthMNL.
Microcontrollers on boards using the SSD1306_OLED
What boards using the SSD1306_OLED are built for
SSD1306_OLED: common questions
Where can I find a SSD1306_OLED reference design?
Each of the 7 boards on this page is a real design using the SSD1306_OLED. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SSD1306_OLED use?
Most are built on ESP32 (4), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the SSD1306_OLED?
The median is 100 × 99.9 mm, and 33% are two-layer designs.
What is the most popular open source board using the SSD1306_OLED?
By GitHub stars, Pi-Pico-Random-Looping-Sequencer by DIYSynthMNL, with 4 stars.
Can I simulate one of these boards using the SSD1306_OLED before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.