6 open source boards using the SST39SF020
Real designs built with the SST39SF020, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Civil25
raleighslack
137.2 × 137.2 mm40 parts2LApache-2.06Flashable dmg cartridge
isaacflaum
51.4 × 61 mm4 parts2LGPL-3.06AOS16 Control Unit
AJain9199
90 × 88 mm121 parts4LNo license1Vectrex vectorblade
technobly
48 × 66 mm15 parts2LCERN-OHL-P-2.01AVR/Arduino
Multicartridge smd-32u4-front dipswitch
ifilot
80 × 100 mm72 parts2LNo license0Multicartridge sst39sf010-topbutton
ifilot
80 × 105.4 mm20 parts2LNo license0
How designs wire the SST39SF020
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SST39SF020 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 100% | — |
| GNDpin 16 | Connected to: GND 100% | — |
| VCCpin 32 | Connected to: 5V 100% |
|
29 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Flashable dmg cartridge by isaacflaum, Civil25 by raleighslack, AOS16 Control Unit by AJain9199 and Vectrex vectorblade by technobly.
The SST39SF020 in open source designs
The gallery holds 6 open source boards using the SST39SF020 from 5 GitHub repositories; a typical one measures about 80 × 94 mm and carries around 30 components.
83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Civil25 by raleighslack.
Microcontrollers on boards using the SST39SF020
What boards using the SST39SF020 are built for
SST39SF020: common questions
Where can I find a SST39SF020 reference design?
Each of the 6 boards on this page is a real design using the SST39SF020. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SST39SF020 VCC pin?
The VCC pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the SST39SF020.
Which microcontrollers do boards using the SST39SF020 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the SST39SF020?
The median is 80 × 94 mm, and 83% are two-layer designs.
What is the most popular open source board using the SST39SF020?
By GitHub stars, Civil25 by raleighslack, with 6 stars.
Can I simulate one of these boards using the SST39SF020 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.