5 open source boards using the STM32F103RCT6
Real designs built with the STM32F103RCT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
IrDA-stm32
but0n
81 × 52 mm76 parts2LNo license54STM32
Lps display rev 10
jerryok826
136.1 × 62.7 mm130 parts2LMIT1STM32
STM32F103RCT6-Dev-Board
TylerJulian
44.5 × 63.5 mm40 parts2LNo license1STM32
3-Axis-Gimbal
IsmaHaikal0910
28 × 40 mm73 parts4LNo license0STM32
Untitled
fernandezdelpeloso
35.2 × 21 mm14 parts2LNo license0
How designs wire the STM32F103RCT6
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32F103RCT6 connects to, and the resistors, capacitors and other passives placed on it.
- The NRST pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ.
- The NRST pin has a capacitor to GND on 4 of 5 designs, most often 1 µF (then 100 nF).
- The PC14 pin is left unconnected on 4 of 5 designs.
- The PC1 pin is left unconnected on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 80% · not connected 20% |
|
| PC13pin 2 | Connected to: Not connected 60% · a signal 40% |
|
| PC14pin 3 | Connected to: Not connected 80% · a signal 20% | — |
| PC15pin 4 | Connected to: Not connected 60% · GND 20% · a signal 20% | — |
| PD0pin 5 | Connected to: Signal 80% · not connected 20% |
|
| PD1pin 6 | Connected to: Signal 60% · not connected 40% |
|
| NRSTpin 7 | Connected to: Signal 80% · not connected 20% |
|
| PC0pin 8 | Connected to: Not connected 60% · a signal 40% | — |
| PC1pin 9 | Connected to: Not connected 80% · a signal 20% | — |
| PC2pin 10 | Connected to: Not connected 80% · a signal 20% | — |
| PC3pin 11 | Connected to: Not connected 80% · a signal 20% | — |
| VSSApin 12 | Connected to: GND 80% · not connected 20% | — |
| VDDApin 13 | Connected to: 3.3V 60% · not connected 20% · a signal 20% |
|
| VSSpin 18, 31, 47, 63 | Connected to: GND 80% · not connected 20% | — |
| VDDpin 19, 32, 48, 64 | Connected to: 3.3V 80% · not connected 20% |
|
| PA4pin 20 | Connected to: Not connected 60% · 3.3V 20% · a signal 20% | — |
| PA5pin 21 | Connected to: Not connected 80% · a signal 20% | — |
| PA6pin 22 | Connected to: Not connected 60% · a signal 40% | — |
| PC4pin 24 | Connected to: Not connected 80% · a signal 20% | — |
| PC5pin 25 | Connected to: Not connected 80% · a signal 20% | — |
| PB1pin 27 | Connected to: A connector 40% · not connected 20% |
|
| PB2pin 28 | Connected to: Signal 60% · not connected 20% · GND 20% |
|
| PB10pin 29 | Connected to: Not connected 60% · a signal 40% | — |
| PB11pin 30 | Connected to: Not connected 60% · a signal 40% | — |
| PB12pin 33 | Connected to: Not connected 60% · a signal 40% | — |
| PB13pin 34 | Connected to: Not connected 60% · a signal 40% | — |
| PB14pin 35 | Connected to: Not connected 60% · a signal 40% |
|
| PB15pin 36 | Connected to: Not connected 60% · a signal 40% |
|
| PC8pin 39 | Connected to: Not connected 60% · a signal 40% | — |
| PC9pin 40 | Connected to: Not connected 60% · a signal 40% | — |
| PA8pin 41 | Connected to: Not connected 60% · a signal 40% | — |
| PA10pin 43 | Connected to: Not connected 60% · a signal 40% | — |
| PA11pin 44 | Connected to: Not connected 60% · a signal 40% | — |
| PA12pin 45 | Connected to: Not connected 60% · a signal 40% | — |
| PA15pin 50 | Connected to: Not connected 80% · a signal 20% | — |
| PC10pin 51 | Connected to: Not connected 80% · a signal 20% | — |
| PC11pin 52 | Connected to: Not connected 60% · a signal 40% | — |
| PC12pin 53 | Connected to: Not connected 60% · a signal 40% | — |
| PD2pin 54 | Connected to: Not connected 80% · a signal 20% | — |
| PB3pin 55 | Connected to: Not connected 60% · a signal 40% | — |
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include IrDA-stm32 by but0n, Lps display rev 10 by jerryok826, STM32F103RCT6-Dev-Board by TylerJulian and Untitled by fernandezdelpeloso.
The STM32F103RCT6 in open source designs
The gallery holds 5 open source boards using the STM32F103RCT6 from 5 GitHub repositories; a typical one measures about 44.5 × 52 mm and carries around 73 components.
80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is IrDA-stm32 by but0n.
Microcontrollers on boards using the STM32F103RCT6
What boards using the STM32F103RCT6 are built for
STM32F103RCT6: common questions
Where can I find a STM32F103RCT6 reference design?
Each of the 5 boards on this page is a real design using the STM32F103RCT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the STM32F103RCT6 NRST pin?
The NRST pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the STM32F103RCT6.
How is the STM32F103RCT6 PC14 pin connected?
The PC14 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the STM32F103RCT6.
How is the STM32F103RCT6 PC1 pin connected?
The PC1 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the STM32F103RCT6.
Which microcontrollers do boards using the STM32F103RCT6 use?
Most are built on STM32 (5).
How big is a typical board using the STM32F103RCT6?
The median is 44.5 × 52 mm, and 80% are two-layer designs.
What is the most popular open source board using the STM32F103RCT6?
By GitHub stars, IrDA-stm32 by but0n, with 54 stars.
Can I simulate one of these boards using the STM32F103RCT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.