4 open source boards using the TJA1042TK-3
Real designs built with the TJA1042TK-3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
HPM5E31 ECatDualFOC
LX050724
85 × 113 mm559 parts4LMIT14RP2040/RP2350
StealthBurner CAN Main
CharlieYu4994
53 × 40 mm87 parts4LNo license10STM32
Pedal interceptor hardware
Wim426F
40 × 50 mm41 parts2LNo license0STM32
BlackPanda
lukasloetkolben
47.5 × 41.7 mm86 parts4LMIT92
The TJA1042TK-3 in open source designs
The gallery holds 4 open source boards using the TJA1042TK-3 from 4 GitHub repositories; a typical one measures about 50.3 × 45.8 mm and carries around 87 components.
75% use four copper layers or more, and 50% carry an open source license.
The most starred is BlackPanda by lukasloetkolben.
Microcontrollers on boards using the TJA1042TK-3
What boards using the TJA1042TK-3 are built for
TJA1042TK-3: common questions
Where can I find a TJA1042TK-3 reference design?
Each of the 4 boards on this page is a real design using the TJA1042TK-3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TJA1042TK-3 use?
Most are built on STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the TJA1042TK-3?
The median is 50.3 × 45.8 mm, and 25% are two-layer designs.
What is the most popular open source board using the TJA1042TK-3?
By GitHub stars, BlackPanda by lukasloetkolben, with 92 stars.
Can I simulate one of these boards using the TJA1042TK-3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.