7 open source boards using the TL074CDR
Real designs built with the TL074CDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Toolbox
StudioKAT
80.9 × 128.5 mm272 parts2LNo license11Attenuverter
schenkzoola
30 × 100 mm49 parts2LCC-BY-NC-4.05Analog parametric equalizer
Mohit623148
326.3 × 76 mm88 parts4LMIT1RP2040/RP2350
Cv module
pythagorean-comma
107 × 233.6 mm289 parts4LNo license0Attenuverter
Schenktronics
30 × 100 mm66 parts2LCC-BY-NC-4.00Attenuverter
schenkzoola
30 × 100 mm66 parts2LCC-BY-NC-4.00Abakus Main
mzuelch
69.9 × 108 mm87 parts2LMIT166
How designs wire the TL074CDR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TL074CDR connects to, and the resistors, capacitors and other passives placed on it.
- The +_3 pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 1 kΩ).
- The -_6 pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 10 kΩ).
- The -_9 pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 10 kΩ).
- The -_13 pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1OUTpin 1 | Connected to: Signal 100% |
|
| -_2pin 2 | Connected to: Signal 100% |
|
| +_3pin 3 | Connected to: Signal 100% |
|
| V+_4pin 4 | Connected to: 12V 71% |
|
| +_5pin 5 | Connected to: TL074CDR 29% |
|
| -_6pin 6 | Connected to: Signal 100% |
|
| 2OUTpin 7 | Connected to: Signal 100% |
|
| 3OUTpin 8 | Connected to: Signal 100% |
|
| -_9pin 9 | Connected to: Signal 100% |
|
| +_10pin 10 | Connected to: TL074CDR 29% |
|
| V-_11pin 11 | Connected to: -12V 71% |
|
| +_12pin 12 | Connected to: Signal 86% |
|
| -_13pin 13 | Connected to: Signal 100% |
|
| 4OUTpin 14 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Abakus Main by mzuelch, Toolbox by StudioKAT, Attenuverter by schenkzoola and Analog parametric equalizer by Mohit623148.
The TL074CDR in open source designs
The gallery holds 7 open source boards using the TL074CDR from 7 GitHub repositories; a typical one measures about 69.8 × 100 mm and carries around 87 components.
71% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Abakus Main by mzuelch.
Parts used alongside the TL074CDR
Microcontrollers on boards using the TL074CDR
What boards using the TL074CDR are built for
TL074CDR: common questions
Where can I find a TL074CDR reference design?
Each of the 7 boards on this page is a real design using the TL074CDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TL074CDR +_3 pin?
The +_3 pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 1 kΩ). Counted from the KiCad layouts of 7 open source designs using the TL074CDR.
What resistor goes on the TL074CDR -_6 pin?
The -_6 pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the TL074CDR.
What resistor goes on the TL074CDR -_9 pin?
The -_9 pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the TL074CDR.
Which microcontrollers do boards using the TL074CDR use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the TL074CDR?
The median is 69.8 × 100 mm, and 71% are two-layer designs.
What is the most popular open source board using the TL074CDR?
By GitHub stars, Abakus Main by mzuelch, with 166 stars.
Can I simulate one of these boards using the TL074CDR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.