6 open source boards using the TLP2361(TPL,E

Real designs built with the TLP2361(TPL,E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the TLP2361(TPL,E

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TLP2361(TPL,E connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC_6 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
  • The A pin has a series resistor on 4 of 5 designs, most often 220 Ω (then 499 Ω).
  • The A pin has a pull-up to 12V on 2 of 5 designs, most often 499 Ω (then 680 Ω).
Apin 1Connected to: Signal 100%
  • Series resistor on 80% · 220 Ω (2), 499 Ω (1), 1 kΩ (1)
  • Pull-up to 12V on 40% · 499 Ω (1), 680 Ω (1)
GND_4pin 4Connected to: GND 100%
VCC_6pin 6Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MidiKeyboardBluePill by drdpj, ComposerMIDICV by CopycatMusic, Beam Break Adapter by RealtimeRoboticsGroup and Default by cHemingway.

The TLP2361(TPL,E in open source designs

The gallery holds 6 open source boards using the TLP2361(TPL,E from 5 GitHub repositories; a typical one measures about 73.9 × 55.7 mm and carries around 86 components.

67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is MidiKeyboardBluePill by drdpj.

Parts used alongside the TLP2361(TPL,E

Microcontrollers on boards using the TLP2361(TPL,E

What boards using the TLP2361(TPL,E are built for

TLP2361(TPL,E: common questions

Where can I find a TLP2361(TPL,E reference design?

Each of the 6 boards on this page is a real design using the TLP2361(TPL,E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TLP2361(TPL,E VCC_6 pin?

The VCC_6 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TLP2361(TPL,E.

What resistor goes on the TLP2361(TPL,E A pin?

The A pin has a series resistor on 4 of 5 designs, most often 220 Ω (then 499 Ω). Counted from the KiCad layouts of 5 open source designs using the TLP2361(TPL,E.

Which microcontrollers do boards using the TLP2361(TPL,E use?

Most are built on Raspberry Pi (2), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the TLP2361(TPL,E?

The median is 73.9 × 55.7 mm, and 67% are two-layer designs.

What is the most popular open source board using the TLP2361(TPL,E?

By GitHub stars, MidiKeyboardBluePill by drdpj, with 7 stars.

Can I simulate one of these boards using the TLP2361(TPL,E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part