6 open source boards using the TLV70212DBVR
Real designs built with the TLV70212DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Dongle pro
fcjr
26 × 98 mm99 parts4LApache-2.016ESP32
Mstd
xvrxvr
96 × 96.3 mm88 parts4LMIT0Dongle lite
fcjr
16 × 55 mm56 parts6LApache-2.016FPGA
Robot
roman-khvatov
130 × 156 mm161 parts2LMIT1M1-ubmc
kernelorg-mirror
32.4 × 52.4 mm23 parts2LMIT0Dongle lite-1s4l
fcjr
22 × 77 mm56 parts4LApache-2.016
The TLV70212DBVR in open source designs
The gallery holds 6 open source boards using the TLV70212DBVR from 4 GitHub repositories; a typical one measures about 29.2 × 86.7 mm and carries around 72 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is Dongle pro by fcjr.
Parts used alongside the TLV70212DBVR
What boards using the TLV70212DBVR are built for
TLV70212DBVR: common questions
Where can I find a TLV70212DBVR reference design?
Each of the 6 boards on this page is a real design using the TLV70212DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TLV70212DBVR?
The 74AVC1T45GW,125, FUSB302BMPX and TMI6050-33 appear in the most repositories here.
Which microcontrollers do boards using the TLV70212DBVR use?
Most are built on ESP32 (1) and FPGA (1).
How big is a typical board using the TLV70212DBVR?
The median is 29.2 × 86.7 mm, and 33% are two-layer designs.
What is the most popular open source board using the TLV70212DBVR?
By GitHub stars, Dongle pro by fcjr, with 16 stars.
Can I simulate one of these boards using the TLV70212DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.