8 open source boards using the TLV70433DBVR
Real designs built with the TLV70433DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 115 parts
Battmon
lpollier
115 partsMIT25 STM32
Picard
weiiwang01
81.5 × 50 mm157 parts6LNo license8STM32
NitrogenGenerator
tinic
160 × 55 mm29 parts2LCustom license2ESP32
Bms
membaye
106 × 74 mm211 parts4LNo license1ESP32
Handset
JeremyLakeyJr
66 × 142 mm217 parts4LNo license0STM32
Modbus environment sensor
robinob
76 × 74 mm75 parts2LNo license0RISC-V
Tetris
roman-khvatov
33 × 91.7 mm76 parts4LMIT1Powmeter
roman-khvatov
27.3 × 59.7 mm38 parts2LMIT1
How designs wire the TLV70433DBVR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TLV70433DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to 5V on 4 of 6 designs (a signal on 2).
- The OUT pin is tied to 3.3V on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| INpin 2 | Connected to: 5V 67% · a signal 33% | — |
| OUTpin 3 | Connected to: 3.3V 67% · a signal 33% | — |
| NCpin 4, 5 | Connected to: Not connected 67% · GND 17% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Picard by weiiwang01, NitrogenGenerator by tinic, Bms by membaye and Powmeter by roman-khvatov.
The TLV70433DBVR in open source designs
The gallery holds 8 open source boards using the TLV70433DBVR from 7 GitHub repositories; a typical one measures about 76 × 74 mm and carries around 96 components.
57% use four copper layers or more, and 38% carry an open source license.
The most starred is Battmon by lpollier.
What boards using the TLV70433DBVR are built for
TLV70433DBVR: common questions
Where can I find a TLV70433DBVR reference design?
Each of the 8 boards on this page is a real design using the TLV70433DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV70433DBVR IN pin connected?
The IN pin is tied to 5V on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the TLV70433DBVR.
How is the TLV70433DBVR OUT pin connected?
The OUT pin is tied to 3.3V on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the TLV70433DBVR.
Which microcontrollers do boards using the TLV70433DBVR use?
Most are built on STM32 (3), ESP32 (2) and RISC-V (1).
How big is a typical board using the TLV70433DBVR?
The median is 76 × 74 mm, and 43% are two-layer designs.
What is the most popular open source board using the TLV70433DBVR?
By GitHub stars, Battmon by lpollier, with 25 stars.
Can I simulate one of these boards using the TLV70433DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.