7 open source boards using the TPD12S016PWR
Real designs built with the TPD12S016PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NuBusFPGA
MelkhiorVintageComputing
161.6 × 100 mm101 parts4LCC-BY-NC-4.062Sbus to ztex
MelkhiorVintageComputing
99.7 × 83.8 mm61 parts4LCC-BY-NC-4.054QuadraFPGA
MelkhiorVintageComputing
100 × 100 mm32 parts4LCC-BY-NC-4.012Zenith
Keyaan-07
85 × 55 mm145 parts6LMIT0Esp32-hdmi quad splitter
gyuhooo
115 × 110 mm142 parts4LMIT0STM32
BB3plus test mainboard
eez-open
180.5 × 176 mm262 parts4LTAPR-OHL-1.012PMOD HDMI
SteveLRojas
54.1 × 22.9 mm16 parts2LCERN-OHL-P-2.00
How designs wire the TPD12S016PWR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPD12S016PWR connects to, and the resistors, capacitors and other passives placed on it.
- The 5V_OUT pin has a capacitor to GND on 6 of 7 designs, most often 100 nF (then 10 µF).
- The LS_OE pin is tied to 3.3V on 6 of 7 designs.
- The VCC5V pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF.
- The CT_HPD pin is tied to 3.3V on 6 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| LS_OEpin 5 | Connected to: 3.3V 86% | — |
| GND6pin 6 | Connected to: GND 100% | — |
| VCC5Vpin 11 | Connected to: 5V 86% |
|
| CT_HPDpin 12 | Connected to: 3.3V 86% | — |
| 5V_OUTpin 13 | Connected to: A connector 86% |
|
| GND14pin 14 | Connected to: GND 86% | — |
| GND19pin 19 | Connected to: GND 86% | — |
| VCCApin 24 | Connected to: 3.3V 100% |
|
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NuBusFPGA by MelkhiorVintageComputing, Sbus to ztex by MelkhiorVintageComputing, BB3plus test mainboard by eez-open and QuadraFPGA by MelkhiorVintageComputing.
The TPD12S016PWR in open source designs
The gallery holds 7 open source boards using the TPD12S016PWR from 7 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 101 components.
86% use four copper layers or more, and 57% carry an open source license.
The most starred is NuBusFPGA by MelkhiorVintageComputing.
Microcontrollers on boards using the TPD12S016PWR
What boards using the TPD12S016PWR are built for
TPD12S016PWR: common questions
Where can I find a TPD12S016PWR reference design?
Each of the 7 boards on this page is a real design using the TPD12S016PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPD12S016PWR 5V_OUT pin connected?
The 5V_OUT pin has a capacitor to GND on 6 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the TPD12S016PWR.
How is the TPD12S016PWR LS_OE pin connected?
The LS_OE pin is tied to 3.3V on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TPD12S016PWR.
What decoupling capacitors do designs use on the TPD12S016PWR VCC5V pin?
The VCC5V pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the TPD12S016PWR.
Which microcontrollers do boards using the TPD12S016PWR use?
Most are built on STM32 (1).
How big is a typical board using the TPD12S016PWR?
The median is 100 × 100 mm, and 14% are two-layer designs.
What is the most popular open source board using the TPD12S016PWR?
By GitHub stars, NuBusFPGA by MelkhiorVintageComputing, with 62 stars.
Can I simulate one of these boards using the TPD12S016PWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.