12 open source boards using the TPD4E02B04DQAR

Real designs built with the TPD4E02B04DQAR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the TPD4E02B04DQAR

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TPD4E02B04DQAR connects to, and the resistors, capacitors and other passives placed on it.

D1+pin 1Connected to: A connector 82%
  • Series resistor on 36% · 100 Ω (1), 15 kΩ (1), 22 Ω (1)
GNDpin 3, 8Connected to: GND 100%
D2-pin 5Connected to: A connector 82%
  • Series resistor on 36% · 10 kΩ (1), 15 kΩ (1), 22 Ω (1)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ict baseboard by antmicro, Qsbc by qfreiman, SF 01 Compute Board by sandgum and Audio latency tester board by antmicro.

The TPD4E02B04DQAR in open source designs

The gallery holds 12 open source boards using the TPD4E02B04DQAR from 12 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 187 components.

100% use four copper layers or more, and 58% carry an open source license.

The most starred is Ict baseboard by antmicro.

Parts used alongside the TPD4E02B04DQAR

Microcontrollers on boards using the TPD4E02B04DQAR

TPD4E02B04DQAR: common questions

Where can I find a TPD4E02B04DQAR reference design?

Each of the 12 boards on this page is a real design using the TPD4E02B04DQAR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPD4E02B04DQAR use?

Most are built on Raspberry Pi (2), ESP32 (1), FPGA (1) and PIC (1).

How big is a typical board using the TPD4E02B04DQAR?

The median is 100 × 80 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPD4E02B04DQAR?

By GitHub stars, Ict baseboard by antmicro, with 4 stars.

Can I simulate one of these boards using the TPD4E02B04DQAR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part