2 open source boards using the TPD4E1B06DRLR

Real designs built with the TPD4E1B06DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TPD4E1B06DRLR in open source designs

The gallery holds 2 open source boards using the TPD4E1B06DRLR from 2 GitHub repositories; a typical one measures about 62.6 × 59.4 mm and carries around 80 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Blackwing cm5-payload v1 by nihil-space.

Microcontrollers on boards using the TPD4E1B06DRLR

What boards using the TPD4E1B06DRLR are built for

TPD4E1B06DRLR: common questions

Where can I find a TPD4E1B06DRLR reference design?

Each of the 2 boards on this page is a real design using the TPD4E1B06DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPD4E1B06DRLR use?

Most are built on Nordic nRF (1) and Raspberry Pi (1).

How big is a typical board using the TPD4E1B06DRLR?

The median is 62.6 × 59.4 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPD4E1B06DRLR?

By GitHub stars, Blackwing cm5-payload v1 by nihil-space, with 26 stars.

Can I simulate one of these boards using the TPD4E1B06DRLR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part