5 open source boards using the TPS22965DSGR

Real designs built with the TPS22965DSGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The TPS22965DSGR in open source designs

The gallery holds 5 open source boards using the TPS22965DSGR from 4 GitHub repositories; a typical one measures about 97.4 × 109.2 mm and carries around 142 components.

80% use four copper layers or more, and 20% carry an open source license.

The most starred is Board v3-83pct by dmz006.

Microcontrollers on boards using the TPS22965DSGR

TPS22965DSGR: common questions

Where can I find a TPS22965DSGR reference design?

Each of the 5 boards on this page is a real design using the TPS22965DSGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS22965DSGR use?

Most are built on Raspberry Pi (3) and STM32 (1).

How big is a typical board using the TPS22965DSGR?

The median is 97.4 × 109.2 mm, and 20% are two-layer designs.

What is the most popular open source board using the TPS22965DSGR?

By GitHub stars, Board v3-83pct by dmz006, with 2 stars.

Can I simulate one of these boards using the TPS22965DSGR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part