3 open source boards using the TPS2378DDA

Real designs built with the TPS2378DDA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The TPS2378DDA in open source designs

The gallery holds 3 open source boards using the TPS2378DDA from 3 GitHub repositories; a typical one measures about 78.1 × 40 mm and carries around 76 components.

67% use four copper layers or more, and 67% carry an open source license.

The most starred is Scalenode cm4-baseboard by antmicro.

Microcontrollers on boards using the TPS2378DDA

What boards using the TPS2378DDA are built for

TPS2378DDA: common questions

Where can I find a TPS2378DDA reference design?

Each of the 3 boards on this page is a real design using the TPS2378DDA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS2378DDA use?

Most are built on Raspberry Pi (1) and STM32 (1).

How big is a typical board using the TPS2378DDA?

The median is 78.1 × 40 mm, and 33% are two-layer designs.

What is the most popular open source board using the TPS2378DDA?

By GitHub stars, Scalenode cm4-baseboard by antmicro, with 151 stars.

Can I simulate one of these boards using the TPS2378DDA before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part