5 open source boards using the TPS2553DBV

Real designs built with the TPS2553DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The TPS2553DBV in open source designs

The gallery holds 5 open source boards using the TPS2553DBV from 4 GitHub repositories; a typical one measures about 85 × 54 mm and carries around 53 components.

60% use four copper layers or more, and 100% carry an open source license.

The most starred is MioLink by Misaka0x2730.

Parts used alongside the TPS2553DBV

Microcontrollers on boards using the TPS2553DBV

What boards using the TPS2553DBV are built for

TPS2553DBV: common questions

Where can I find a TPS2553DBV reference design?

Each of the 5 boards on this page is a real design using the TPS2553DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS2553DBV use?

Most are built on RP2040/RP2350 (3), ESP32 (1) and PIC (1).

How big is a typical board using the TPS2553DBV?

The median is 85 × 54 mm, and 40% are two-layer designs.

What is the most popular open source board using the TPS2553DBV?

By GitHub stars, MioLink by Misaka0x2730, with 27 stars.

Can I simulate one of these boards using the TPS2553DBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part