8 open source boards using the SN74LVC2T45DCU
Real designs built with the SN74LVC2T45DCU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Mowi
septentrio-gnss
70 × 47.5 mm248 parts6LNo license35RP2040/RP2350
MioLink
Misaka0x2730
53 × 42 mm92 parts4LGPL-3.027PIC
YukaLink
Misaka0x2730
94.3 × 81.8 mm235 parts4LGPL-3.03ESP32
Pannel
cocobot
139.5 × 153 mm266 parts2LNo license2BenTo-Legacy
benkuper
142 × 23 mm76 parts2LGPL-3.01USTSIPIN03
ust-modules
70.6 × 50.3 mm85 parts2LGPL-3.00RP2040/RP2350
MioLink Pico
Misaka0x2730
53 × 54 mm53 parts4LGPL-3.027ESP32
Pmi 2023
cocobot
85 × 71.5 mm266 parts2LNo license2
How designs wire the SN74LVC2T45DCU
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SN74LVC2T45DCU connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF.
- The VCCB pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 100% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| 2Bpin 6 | Connected to: Signal 100% |
|
| 1Bpin 7 | Connected to: Signal 100% |
|
| VCCBpin 8 | Connected to: 3.3V 67% · a signal 33% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mowi by septentrio-gnss, MioLink by Misaka0x2730, YukaLink by Misaka0x2730 and Pannel by cocobot.
The SN74LVC2T45DCU in open source designs
The gallery holds 8 open source boards using the SN74LVC2T45DCU from 6 GitHub repositories; a typical one measures about 77.8 × 52.1 mm and carries around 164 components.
50% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Mowi by septentrio-gnss.
Parts used alongside the SN74LVC2T45DCU
Microcontrollers on boards using the SN74LVC2T45DCU
What boards using the SN74LVC2T45DCU are built for
SN74LVC2T45DCU: common questions
Where can I find a SN74LVC2T45DCU reference design?
Each of the 8 boards on this page is a real design using the SN74LVC2T45DCU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC2T45DCU VCCA pin?
The VCCA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the SN74LVC2T45DCU.
What decoupling capacitors do designs use on the SN74LVC2T45DCU VCCB pin?
The VCCB pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the SN74LVC2T45DCU.
Which microcontrollers do boards using the SN74LVC2T45DCU use?
Most are built on ESP32 (3), RP2040/RP2350 (2) and PIC (1).
How big is a typical board using the SN74LVC2T45DCU?
The median is 77.8 × 52.1 mm, and 50% are two-layer designs.
What is the most popular open source board using the SN74LVC2T45DCU?
By GitHub stars, Mowi by septentrio-gnss, with 35 stars.
Can I simulate one of these boards using the SN74LVC2T45DCU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.