2 open source boards using the TPS26601RHFR

Real designs built with the TPS26601RHFR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TPS26601RHFR in open source designs

The gallery holds 2 open source boards using the TPS26601RHFR from 2 GitHub repositories; a typical one measures about 81.5 × 65 mm and carries around 444 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Switch main v5 by ben5049.

Parts used alongside the TPS26601RHFR

Microcontrollers on boards using the TPS26601RHFR

TPS26601RHFR: common questions

Where can I find a TPS26601RHFR reference design?

Each of the 2 boards on this page is a real design using the TPS26601RHFR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS26601RHFR use?

Most are built on Raspberry Pi (1) and STM32 (1).

How big is a typical board using the TPS26601RHFR?

The median is 81.5 × 65 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS26601RHFR?

By GitHub stars, Switch main v5 by ben5049, with 24 stars.

Can I simulate one of these boards using the TPS26601RHFR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part