2 open source boards using the TPS7B8133QDRVRQ1
Real designs built with the TPS7B8133QDRVRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Switch main v5
ben5049
93 × 50 mm594 parts6LAGPL-3.024Raspberry Pi
Cm5-carrier v2
ben5049
70 × 80 mm294 parts6LAGPL-3.01
The TPS7B8133QDRVRQ1 in open source designs
The gallery holds 2 open source boards using the TPS7B8133QDRVRQ1 from 2 GitHub repositories; a typical one measures about 81.5 × 65 mm and carries around 444 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Switch main v5 by ben5049.
Parts used alongside the TPS7B8133QDRVRQ1
Microcontrollers on boards using the TPS7B8133QDRVRQ1
TPS7B8133QDRVRQ1: common questions
Where can I find a TPS7B8133QDRVRQ1 reference design?
Each of the 2 boards on this page is a real design using the TPS7B8133QDRVRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS7B8133QDRVRQ1 use?
Most are built on Raspberry Pi (1) and STM32 (1).
How big is a typical board using the TPS7B8133QDRVRQ1?
The median is 81.5 × 65 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPS7B8133QDRVRQ1?
By GitHub stars, Switch main v5 by ben5049, with 24 stars.
Can I simulate one of these boards using the TPS7B8133QDRVRQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.