6 open source boards using the TPS54294

Real designs built with the TPS54294, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the TPS54294

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPS54294 connects to, and the resistors, capacitors and other passives placed on it.

  • The VBST1 pin has a series capacitor on 5 of 6 designs, most often 100 nF.
  • The SW1 pin has a series capacitor on 5 of 6 designs, most often 100 nF.
  • The SW1 pin has a inductor on 5 of 6 designs, most often 1.5 µH (then 2.2 µH).
  • The SW2 pin has a series capacitor on 5 of 6 designs, most often 100 nF.
VIN1pin 1Connected to: VIN 50% · a signal 50%
  • Decoupling capacitor on 67% · 100 nF (10), 10 µF (9)
  • Capacitor on 33% · 100 nF (2)
VBST1pin 2Connected to: Signal 83% · 5V 17%
  • Series capacitor on 83% · 100 nF (5)
SW1pin 3Connected to: Signal 83% · 5V 17%
  • Series capacitor on 83% · 100 nF (5)
  • Inductor on 83% · 1.5 µH (4), 2.2 µH (1)
PGND1pin 4Connected to: GND 67% · a signal 33%
  • Series capacitor on 33% · 100 nF (1), 1 µF (1)
EN1pin 5Connected to: TPS54325 50% · VIN 17%
  • Series resistor on 50% · 100 kΩ (3)
PG1pin 6Connected to: Signal 83% · GND 17%
  • Series resistor on 67% · 100 kΩ (3), 10 kΩ (1)
VFB1pin 7Connected to: Signal 83% · 1.2V 17%
  • Resistor to GND on 67% · 22.1 kΩ (4)
  • Pull-up to 1.8V on 67% · 30.1 kΩ (2), 73.2 kΩ (1), 6.81 kΩ (1)
  • Capacitor to the supply on 33% · 22 pF (2)
  • Series resistor on 33% · 22.1 kΩ (1), 30.1 kΩ (1)
GNDpin 8, 17Connected to: GND 75% · a signal 17%
VREG5pin 9Connected to: Signal 83% · VREG5 17%
  • Capacitor to GND on 67% · 1 µF (4)
  • Series resistor on 67% · 100 kΩ (3), 10 kΩ (2)
VFB2pin 10Connected to: Signal 83% · GND 17%
  • Resistor to GND on 67% · 22.1 kΩ (4)
  • Pull-up to 3.3V on 67% · 73.2 kΩ (2), 124 kΩ (1), 30.1 kΩ (1)
  • Capacitor to the supply on 33% · 22 pF (2)
  • Series resistor on 33% · 22.1 kΩ (1), 73.2 kΩ (1)
PG2pin 11Connected to: Not connected 67% · a signal 33%
EN2pin 12Connected to: Signal 100%
  • Series resistor on 67% · 100 kΩ (3), 10 kΩ (1)
  • Pull-up to VREG5 on 33% · 10 kΩ (1), 50 kΩ (1)
PGND2pin 13Connected to: GND 67% · 2.5V 17% · a signal 17%
SW2pin 14Connected to: Signal 83% · 2.5V 17%
  • Series capacitor on 83% · 100 nF (5)
  • Inductor on 83% · 2.2 µH (3), 3.3 µH (1), 1.5 µH (1)
VBST2pin 15Connected to: Signal 83% · GND 17%
  • Series capacitor on 83% · 100 nF (5)
VIN2pin 16Connected to: VIN 50% · a signal 50%
  • Decoupling capacitor on 67% · 100 nF (9), 10 µF (9)
  • Capacitor on 33% · 100 nF (1), 10 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Printalyzer - Main Board by dektronics, AsD Preamp Digital Preamplifier by djupdal, Formatter Ethernet Switch by foxsi and Pcb by vgacentrifuge.

The TPS54294 in open source designs

The gallery holds 6 open source boards using the TPS54294 from 6 GitHub repositories; a typical one measures about 156.4 × 102.2 mm and carries around 172 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Printalyzer - Main Board by dektronics.

Parts used alongside the TPS54294

Microcontrollers on boards using the TPS54294

What boards using the TPS54294 are built for

TPS54294: common questions

Where can I find a TPS54294 reference design?

Each of the 6 boards on this page is a real design using the TPS54294. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS54294 VBST1 pin connected?

The VBST1 pin has a series capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the TPS54294.

How is the TPS54294 SW1 pin connected?

The SW1 pin has a series capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the TPS54294.

How is the TPS54294 SW2 pin connected?

The SW2 pin has a series capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the TPS54294.

What parts are used alongside the TPS54294?

The TPS54325, XC7A100T-FTG256 and Oscillator appear in the most repositories here.

Which microcontrollers do boards using the TPS54294 use?

Most are built on FPGA (4) and STM32 (1).

How big is a typical board using the TPS54294?

The median is 156.4 × 102.2 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS54294?

By GitHub stars, Printalyzer - Main Board by dektronics, with 37 stars.

Can I simulate one of these boards using the TPS54294 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part