7 open source boards using the TPS55289RYQR

Real designs built with the TPS55289RYQR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TPS55289RYQR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS55289RYQR connects to, and the resistors, capacitors and other passives placed on it.

  • The SW1 pin has a series capacitor on 5 of 5 designs, most often 100 nF.
  • The SW2 pin has a series capacitor on 5 of 5 designs, most often 100 nF.
  • The BOOT2 pin has a series capacitor on 5 of 5 designs, most often 100 nF.
  • The BOOT1 pin has a series capacitor on 5 of 5 designs, most often 100 nF.
EN/UVLOpin 1Connected to: A connector 40%
  • Resistor to GND on 40% · 20 kΩ (1), 100 kΩ (1)
MODEpin 2Connected to: A connector 40%
  • Resistor to GND on 40% · 10 kΩ (1), 20 kΩ (1)
DITH/SYNCpin 5Connected to: Signal 80% · GND 20%
  • Capacitor to GND on 60% · 10 nF (2), 22 nF (1)
FSWpin 6Connected to: Signal 100%
  • Resistor to GND on 80% · 49.9 kΩ (2), 100 kΩ (2), 56 kΩ (1)
VINpin 7Connected to: A connector 40% · VSYS_B 40%
  • Capacitor to GND on 80% · 100 nF (4), 10 µF (4), 22 µF (3)
  • Series resistor on 40% · 100 kΩ (1)
SW1pin 8Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (5)
  • Inductor on 80% · 4.7 µH (2), 3.8 µH (1)
PGNDpin 9Connected to: GND 80% · a signal 20%
SW2pin 10Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (5)
  • Inductor on 80% · 4.7 µH (2), 3.8 µH (1)
VOUTpin 11Connected to: Signal 80% · 12V 20%
  • Capacitor to GND on 80% · 22 µF (8), 10 µF (6), 100 nF (3)
  • Series resistor on 40% · 15 mΩ (1)
ISPpin 12Connected to: Signal 80% · 12V 20%
  • Series capacitor on 60% · 22 µF (3), 100 nF (2), 220 nF (1)
  • Series resistor on 60% · 10 Ω (2), 15 mΩ (1)
  • Capacitor to GND on 40% · 22 µF (8)
ISNpin 13Connected to: Signal 80% · 12V 20%
  • Series capacitor on 60% · 22 µF (3), 100 nF (2), 220 nF (1)
  • Series resistor on 60% · 10 Ω (2), 15 mΩ (1)
FB/INTpin 14Connected to: Not connected 60% · a signal 40%
  • Pull-up to 12V on 40% · 68 kΩ (1), 20 kΩ (1)
COMPpin 15Connected to: Signal 100%
  • Capacitor to GND on 80% · 100 pF (3), 3.3 nF (1)
  • Series resistor on 80% · 27.4 kΩ (2), 10 kΩ (1), 147 kΩ (1)
CDCpin 16Connected to: Signal 80% · not connected 20%
  • Resistor to GND on 60% · 150 kΩ (2), 56 kΩ (1)
AGNDpin 17Connected to: GND 80% · a signal 20%
VCCpin 18Connected to: Signal 100%
  • Capacitor to GND on 80% · 4.7 µF (3), 10 µF (1)
BOOT2pin 19Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (5)
BOOT1pin 20Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (5)
EXTVCCpin 21Connected to: Signal 100%
  • Capacitor to GND on 40% · 100 nF (2)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sabre-Integrated flight controller by CircuitGuy943, Smart Battery Charger Rev B 250414 by COSMIIC-Community, USB-C-Portable-PSU by Ng-Chen-Xuan and EDL Project 2026 by segf4u1t-139.

The TPS55289RYQR in open source designs

The gallery holds 7 open source boards using the TPS55289RYQR from 5 GitHub repositories; a typical one measures about 63.5 × 100.8 mm and carries around 151 components.

57% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is Sabre-Integrated flight controller by CircuitGuy943.

Parts used alongside the TPS55289RYQR

Microcontrollers on boards using the TPS55289RYQR

What boards using the TPS55289RYQR are built for

TPS55289RYQR: common questions

Where can I find a TPS55289RYQR reference design?

Each of the 7 boards on this page is a real design using the TPS55289RYQR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS55289RYQR SW1 pin connected?

The SW1 pin has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TPS55289RYQR.

How is the TPS55289RYQR SW2 pin connected?

The SW2 pin has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TPS55289RYQR.

How is the TPS55289RYQR BOOT2 pin connected?

The BOOT2 pin has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TPS55289RYQR.

Which microcontrollers do boards using the TPS55289RYQR use?

Most are built on STM32 (5).

How big is a typical board using the TPS55289RYQR?

The median is 63.5 × 100.8 mm, and 57% are two-layer designs.

What is the most popular open source board using the TPS55289RYQR?

By GitHub stars, Sabre-Integrated flight controller by CircuitGuy943, with 2 stars.

Can I simulate one of these boards using the TPS55289RYQR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part