5 open source boards using the TPS72301DBVR
Real designs built with the TPS72301DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
VersaSens
esl-epfl
55 × 30 mm262 parts4LNo license9Oe acquisition board gen3
open-ephys
160 × 161.8 mm306 parts4LCustom license1FPGA
Scopefun hardware
snhobbs
100 × 160 mm589 parts6LCustom license0Psu
OpenSiPM
65 × 18.1 mm32 parts4LNo license7Psu
OpenSiPM
23 × 22.2 mm14 parts2LMIT44
How designs wire the TPS72301DBVR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS72301DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to -5V on 5 of 5 designs.
- The EN pin is tied to -5V on 5 of 5 designs.
- The FB pin has a resistor to GND on 3 of 5 designs, most often 24.9 kΩ (then 64.9 kΩ).
- The OUT pin has a capacitor to GND on 3 of 5 designs, most often 10 µF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| INpin 2 | Connected to: -5V 100% | — |
| ENpin 3 | Connected to: -5V 100% | — |
| FBpin 4 | Connected to: Signal 100% |
|
| OUTpin 5 | Connected to: GND 40% · 2.5V 40% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Psu by OpenSiPM, VersaSens by esl-epfl, Psu by OpenSiPM and Oe acquisition board gen3 by open-ephys.
The TPS72301DBVR in open source designs
The gallery holds 5 open source boards using the TPS72301DBVR from 5 GitHub repositories; a typical one measures about 65 × 30 mm and carries around 262 components.
80% use four copper layers or more, and 20% carry an open source license.
The most starred is Psu by OpenSiPM.
Parts used alongside the TPS72301DBVR
Microcontrollers on boards using the TPS72301DBVR
What boards using the TPS72301DBVR are built for
TPS72301DBVR: common questions
Where can I find a TPS72301DBVR reference design?
Each of the 5 boards on this page is a real design using the TPS72301DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS72301DBVR IN pin connected?
The IN pin is tied to -5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS72301DBVR.
How is the TPS72301DBVR EN pin connected?
The EN pin is tied to -5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS72301DBVR.
What resistor goes on the TPS72301DBVR FB pin?
The FB pin has a resistor to GND on 3 of 5 designs, most often 24.9 kΩ (then 64.9 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPS72301DBVR.
Which microcontrollers do boards using the TPS72301DBVR use?
Most are built on FPGA (1).
How big is a typical board using the TPS72301DBVR?
The median is 65 × 30 mm, and 20% are two-layer designs.
What is the most popular open source board using the TPS72301DBVR?
By GitHub stars, Psu by OpenSiPM, with 44 stars.
Can I simulate one of these boards using the TPS72301DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.