9 open source boards using the TPS79333DBVR
Real designs built with the TPS79333DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
I2s audio phat
skiselev
30 × 65 mm59 parts2LGPL-3.066STM32
Teapot
cillian64
23 × 57 mm48 parts2LNo license1- schematic only · 67 partsESP32
Prosthetic
SoumyadeepXD
67 partsNo license1 Rfof frx
liuweiseu
60 × 40 mm100 parts4LCERN-OHL-S-2.00Microchip SAM
Qcomlt debugboard
CodeLinaro-mirror
20 × 55.7 mm38 parts4LCERN-OHL-P-2.00Regulator
shelxty
28.4 × 9.4 mm10 parts2LNo license0FRX
EIGSEP
60 × 40 mm100 parts4LNo license0Psu
OpenSiPM
65 × 18.1 mm32 parts4LNo license7Psu
OpenSiPM
23 × 22.2 mm14 parts2LMIT44
How designs wire the TPS79333DBVR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPS79333DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The BP pin has a capacitor to GND on 8 of 8 designs, most often 10 nF (then 1.2 nF).
- The OUT pin is tied to 3.3V on 7 of 8 designs.
- The IN pin is tied to 5V on 6 of 8 designs (a signal on 2).
- The EN pin is tied to 5V on 6 of 8 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 75% · a signal 25% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 5V 75% · a signal 25% | — |
| BPpin 4 | Connected to: Signal 100% |
|
| OUTpin 5 | Connected to: 3.3V 88% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include I2s audio phat by skiselev, Psu by OpenSiPM, Psu by OpenSiPM and Teapot by cillian64.
The TPS79333DBVR in open source designs
The gallery holds 9 open source boards using the TPS79333DBVR from 9 GitHub repositories; a typical one measures about 29.2 × 40 mm and carries around 48 components.
50% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is I2s audio phat by skiselev.
Parts used alongside the TPS79333DBVR
Microcontrollers on boards using the TPS79333DBVR
What boards using the TPS79333DBVR are built for
TPS79333DBVR: common questions
Where can I find a TPS79333DBVR reference design?
Each of the 9 boards on this page is a real design using the TPS79333DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS79333DBVR BP pin connected?
The BP pin has a capacitor to GND on 8 of 8 designs, most often 10 nF (then 1.2 nF). Counted from the KiCad layouts of 8 open source designs using the TPS79333DBVR.
How is the TPS79333DBVR OUT pin connected?
The OUT pin is tied to 3.3V on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the TPS79333DBVR.
How is the TPS79333DBVR IN pin connected?
The IN pin is tied to 5V on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the TPS79333DBVR.
What parts are used alongside the TPS79333DBVR?
The AD8363ACPZ-R7, F1958NBGK, INA296B4IDDFR, PAT1220-C-3DB-T5 and PGA-105+ appear in the most repositories here.
Which microcontrollers do boards using the TPS79333DBVR use?
Most are built on ESP32 (1), Microchip SAM (1) and STM32 (1).
How big is a typical board using the TPS79333DBVR?
The median is 29.2 × 40 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPS79333DBVR?
By GitHub stars, I2s audio phat by skiselev, with 66 stars.
Can I simulate one of these boards using the TPS79333DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.