2 open source boards using the TPS783XX

Real designs built with the TPS783XX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TPS783XX in open source designs

The gallery holds 2 open source boards using the TPS783XX from 2 GitHub repositories; a typical one measures about 38.5 × 24.2 mm and carries around 114 components.

0% carry an open source license.

The most starred is Ruuvitracker hw by ruuvi.

Parts used alongside the TPS783XX

Microcontrollers on boards using the TPS783XX

TPS783XX: common questions

Where can I find a TPS783XX reference design?

Each of the 2 boards on this page is a real design using the TPS783XX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TPS783XX?

The MCP73831, MMA8652FC and TPD2S017 appear in the most repositories here.

Which microcontrollers do boards using the TPS783XX use?

Most are built on STM32 (2).

How big is a typical board using the TPS783XX?

The median is 38.5 × 24.2 mm.

What is the most popular open source board using the TPS783XX?

By GitHub stars, Ruuvitracker hw by ruuvi, with 14 stars.

Can I simulate one of these boards using the TPS783XX before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part