6 open source boards using the TPS7A2601DRVR
Real designs built with the TPS7A2601DRVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Kicad usb pd power manager
flisboac
26.2 × 76.2 mm141 parts4LCERN-OHL-P-2.03Fiber Transmitter Module
EIGSEP
60.1 × 45.2 mm153 parts4LNo license0Rfof ftx
liuweiseu
60.1 × 45.2 mm153 parts4LCERN-OHL-S-2.00Rfof frx
liuweiseu
60 × 40 mm100 parts4LCERN-OHL-S-2.00FRX
EIGSEP
60 × 40 mm100 parts4LNo license0Batt Boardv1
UChicago-Space-Program
90.2 × 95.9 mm55 parts2LNo license1
How designs wire the TPS7A2601DRVR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS7A2601DRVR connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 5.5V on 4 of 5 designs.
- The FB pin has a pull-up to 5.5V on 3 of 5 designs, most often 82 kΩ.
- The FB pin has a resistor to GND on 3 of 5 designs, most often 24 kΩ.
- The PG pin has a pull-up to 5.5V on 3 of 5 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: 5.5V 80% · a signal 20% | — |
| FBpin 2 | Connected to: Signal 80% · not connected 20% |
|
| PGpin 3 | Connected to: Signal 80% · GND 20% |
|
| ENpin 4 | Connected to: VDD 60% · a signal 40% | — |
| GNDpin 5 | Connected to: GND 83% · a signal 17% | — |
| INpin 6 | Connected to: VDD 60% · a signal 40% | — |
| EPpin 7 | Connected to: GND 80% · a signal 20% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kicad usb pd power manager by flisboac, Batt Boardv1 by UChicago-Space-Program, FRX by EIGSEP and Rfof frx by liuweiseu.
The TPS7A2601DRVR in open source designs
The gallery holds 6 open source boards using the TPS7A2601DRVR from 5 GitHub repositories; a typical one measures about 60 × 45.2 mm and carries around 121 components.
83% use four copper layers or more, and 50% carry an open source license.
The most starred is Kicad usb pd power manager by flisboac.
Parts used alongside the TPS7A2601DRVR
What boards using the TPS7A2601DRVR are built for
TPS7A2601DRVR: common questions
Where can I find a TPS7A2601DRVR reference design?
Each of the 6 boards on this page is a real design using the TPS7A2601DRVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS7A2601DRVR OUT pin connected?
The OUT pin is tied to 5.5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS7A2601DRVR.
What pull-up resistor is used on the TPS7A2601DRVR FB pin?
The FB pin has a pull-up to 5.5V on 3 of 5 designs, most often 82 kΩ. Counted from the KiCad layouts of 5 open source designs using the TPS7A2601DRVR.
What pull-up resistor is used on the TPS7A2601DRVR PG pin?
The PG pin has a pull-up to 5.5V on 3 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the TPS7A2601DRVR.
What parts are used alongside the TPS7A2601DRVR?
The AD8363ACPZ-R7, F1958NBGK, INA296B4IDDFR, PAT1220-C-3DB-T5 and PGA-105+ appear in the most repositories here.
How big is a typical board using the TPS7A2601DRVR?
The median is 60 × 45.2 mm, and 17% are two-layer designs.
What is the most popular open source board using the TPS7A2601DRVR?
By GitHub stars, Kicad usb pd power manager by flisboac, with 3 stars.
Can I simulate one of these boards using the TPS7A2601DRVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.