13 open source boards using the TCA6408ARGTR

Real designs built with the TCA6408ARGTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the TCA6408ARGTR

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the TCA6408ARGTR connects to, and the resistors, capacitors and other passives placed on it.

  • The SCL pin has a pull-up to 3.3V on 8 of 10 designs, most often 10 kΩ (then 4.7 kΩ).
  • The SDA pin has a pull-up to 3.3V on 8 of 10 designs, most often 10 kΩ (then 4.7 kΩ).
  • The VCCP pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 10 µF).
  • The VCCI pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 10 µF).
P0pin 2Connected to: F1958NBGK 30%
  • Resistor to GND on 30% · 100 kΩ (2), 10 kΩ (1)
  • Series resistor on 30% · 10 kΩ (2), 100 kΩ (1)
P1pin 3Connected to: F1958NBGK 30%
  • Resistor to GND on 30% · 100 kΩ (2), 10 kΩ (1)
  • Series resistor on 30% · 10 kΩ (2), 100 kΩ (1)
P2pin 4Connected to: F1958NBGK 30%
  • Series resistor on 30% · 10 kΩ (2), 100 kΩ (1)
  • Resistor to GND on 30% · 100 kΩ (2), 10 kΩ (1)
P3pin 5Connected to: F1958NBGK 30%
  • Series resistor on 40% · 10 kΩ (3), 100 kΩ (1)
  • Resistor to GND on 30% · 100 kΩ (2), 10 kΩ (1)
GNDpin 6, 17Connected to: GND 80%
P4pin 7Connected to: F1958NBGK 30%
  • Series resistor on 40% · 10 kΩ (2), 1 kΩ (1), 100 kΩ (1)
  • Pull-up to 3.3V on 30% · 10 kΩ (2), 27 kΩ (1)
P5pin 8Connected to: F1958NBGK 30%
  • Series resistor on 40% · 10 kΩ (2), 422 Ω (1), 100 kΩ (1)
  • Pull-up to 3.3V on 30% · 1 kΩ (1), 27 kΩ (1), 10 kΩ (1)
P6pin 9Connected to: F1958NBGK 30%
  • Series resistor on 40% · 1 kΩ (1), 422 Ω (1), 100 kΩ (1)
  • Pull-up to 3.3V on 30% · 10 kΩ (2), 27 kΩ (1)
P7pin 10Connected to: F1958NBGK 30% · not connected 30%
  • Pull-up to 5.5V on 40% · 10 kΩ (3), 27 kΩ (1)
INTpin 11Connected to: Not connected 60% · a signal 40%
  • Pull-up to 3.3V on 40% · 10 kΩ (2), 4.7 kΩ (1), 91 kΩ (1)
SCLpin 12Connected to: A connector 40%, TLA2528IRTER 30%, TMP117AIDRVR 20%
  • Pull-up to 3.3V on 80% · 10 kΩ (5), 4.7 kΩ (1), 2.2 kΩ (1)
SDApin 13Connected to: A connector 40%, TLA2528IRTER 30%, TMP117AIDRVR 20%
  • Pull-up to 3.3V on 80% · 10 kΩ (5), 4.7 kΩ (1), 2.2 kΩ (1)
VCCPpin 14Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (10), 10 µF (2)
VCCIpin 15Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (10), 10 µF (2)
ADDRpin 16Connected to: GND 70% · 3.3V 20%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cell by atopile, REG1-App-SA-4xSELV by OpenKNX, WiFi-Gate-Control-Board by mikelawrence and Pannel by cocobot.

The TCA6408ARGTR in open source designs

The gallery holds 13 open source boards using the TCA6408ARGTR from 10 GitHub repositories; a typical one measures about 83 × 45.2 mm and carries around 154 components.

69% use four copper layers or more, and 38% carry an open source license.

The most starred is Cellsim-8ch by atopile.

Microcontrollers on boards using the TCA6408ARGTR

What boards using the TCA6408ARGTR are built for

TCA6408ARGTR: common questions

Where can I find a TCA6408ARGTR reference design?

Each of the 13 boards on this page is a real design using the TCA6408ARGTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the TCA6408ARGTR SCL pin?

The SCL pin has a pull-up to 3.3V on 8 of 10 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 10 open source designs using the TCA6408ARGTR.

What pull-up resistor is used on the TCA6408ARGTR SDA pin?

The SDA pin has a pull-up to 3.3V on 8 of 10 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 10 open source designs using the TCA6408ARGTR.

What decoupling capacitors do designs use on the TCA6408ARGTR VCCP pin?

The VCCP pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the TCA6408ARGTR.

What parts are used alongside the TCA6408ARGTR?

The AD8363ACPZ-R7, F1958NBGK, INA296B4IDDFR, PAT1220-C-3DB-T5 and PGA-105+ appear in the most repositories here.

Which microcontrollers do boards using the TCA6408ARGTR use?

Most are built on ESP32 (3), Raspberry Pi (1) and Microchip SAM (1).

How big is a typical board using the TCA6408ARGTR?

The median is 83 × 45.2 mm, and 31% are two-layer designs.

What is the most popular open source board using the TCA6408ARGTR?

By GitHub stars, Cellsim-8ch by atopile, with 29 stars.

Can I simulate one of these boards using the TCA6408ARGTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part