7 open source boards using the TSR_2-2450

Real designs built with the TSR_2-2450, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TSR_2-2450

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TSR_2-2450 connects to, and the resistors, capacitors and other passives placed on it.

+VINpin 1Connected to: VCC 60% · GND 20% · a signal 20%
GNDpin 2Connected to: GND 80% · a signal 20%
+VOUTpin 3Connected to: 5V 80% · GND 20%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MHCI-DMX by About-Time-Technologies, Carte puissance crac v2 by Achille-92, Servo Tester by Fabien-B and Dtu unicycle by he1k.

The TSR_2-2450 in open source designs

The gallery holds 7 open source boards using the TSR_2-2450 from 5 GitHub repositories; a typical one measures about 87.6 × 71.9 mm and carries around 36 components.

57% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is MHCI-DMX by About-Time-Technologies.

Parts used alongside the TSR_2-2450

Microcontrollers on boards using the TSR_2-2450

What boards using the TSR_2-2450 are built for

TSR_2-2450: common questions

Where can I find a TSR_2-2450 reference design?

Each of the 7 boards on this page is a real design using the TSR_2-2450. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TSR_2-2450 use?

Most are built on Raspberry Pi (3), ESP32 (1), NXP (1) and STM32 (1).

How big is a typical board using the TSR_2-2450?

The median is 87.6 × 71.9 mm, and 57% are two-layer designs.

What is the most popular open source board using the TSR_2-2450?

By GitHub stars, MHCI-DMX by About-Time-Technologies, with 2 stars.

Can I simulate one of these boards using the TSR_2-2450 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part