2 open source boards using the TSSOP28_BREAKOUT

Real designs built with the TSSOP28_BREAKOUT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TSSOP28_BREAKOUT in open source designs

The gallery holds 2 open source boards using the TSSOP28_BREAKOUT from 2 GitHub repositories; a typical one measures about 91.4 × 91.4 mm and carries around 82 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Stm32 nucleo-64 proto shield by AnttiNykanen.

What boards using the TSSOP28_BREAKOUT are built for

TSSOP28_BREAKOUT: common questions

Where can I find a TSSOP28_BREAKOUT reference design?

Each of the 2 boards on this page is a real design using the TSSOP28_BREAKOUT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the TSSOP28_BREAKOUT?

The median is 91.4 × 91.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the TSSOP28_BREAKOUT?

By GitHub stars, Stm32 nucleo-64 proto shield by AnttiNykanen, with 12 stars.

Can I simulate one of these boards using the TSSOP28_BREAKOUT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part