8 open source boards using the TTP223

Real designs built with the TTP223, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the TTP223

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TTP223 connects to, and the resistors, capacitors and other passives placed on it.

  • The I pin has a capacitor to GND on 5 of 8 designs, most often 22 pF.
  • The VDD pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF.
  • The TOG pin is tied to GND on 4 of 6 designs (a signal on 2).
VSSpin 2Connected to: GND 75%
Ipin 3Connected to: A connector 25%
  • Capacitor to GND on 63% · 22 pF (2)
VDDpin 5Connected to: 5V 100%
  • Decoupling capacitor on 67% · 100 nF (4)
TOGpin 6Connected to: GND 67% · a signal 33%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenThereminV4 by GaudiLabs, TouchSensor by nseuf, Pcb touch test by TimGoll and P00C 96-Well Pipette visualizer by 42CrMo4.

The TTP223 in open source designs

The gallery holds 8 open source boards using the TTP223 from 8 GitHub repositories; a typical one measures about 65.5 × 81.2 mm and carries around 28 components.

88% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is OpenThereminV4 by GaudiLabs.

Microcontrollers on boards using the TTP223

TTP223: common questions

Where can I find a TTP223 reference design?

Each of the 8 boards on this page is a real design using the TTP223. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TTP223 I pin connected?

The I pin has a capacitor to GND on 5 of 8 designs, most often 22 pF. Counted from the KiCad layouts of 8 open source designs using the TTP223.

What decoupling capacitors do designs use on the TTP223 VDD pin?

The VDD pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the TTP223.

How is the TTP223 TOG pin connected?

The TOG pin is tied to GND on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the TTP223.

Which microcontrollers do boards using the TTP223 use?

Most are built on AVR/Arduino (4) and ESP32 (1).

How big is a typical board using the TTP223?

The median is 65.5 × 81.2 mm, and 88% are two-layer designs.

What is the most popular open source board using the TTP223?

By GitHub stars, OpenThereminV4 by GaudiLabs, with 238 stars.

Can I simulate one of these boards using the TTP223 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part