7 open source boards using the TVS2200DRV
Real designs built with the TVS2200DRV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Anyon e motherboard
byrantech
133 × 92 mm258 parts6LMIT4.3k100W-Charging
Redherring32
38.5 × 38.5 mm84 parts4LTAPR-OHL-1.043Nordic nRF
Unwired
NoxAevi
29.4 × 61.1 mm83 parts2LGPL-3.01RP2040/RP2350
Nref motherboard
cetola
122.6 × 75.9 mm269 parts6LNo license0STM32
KigEyes
jrymk
100 × 60 mm256 parts4LCERN-OHL-S-2.00ESP32
SCAN mainboard
jjsprandel
100 × 70 mm54 parts2LCC-BY-NC-4.01ESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
How designs wire the TVS2200DRV
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TVS2200DRV connects to, and the resistors, capacitors and other passives placed on it.
- The IN pins is tied to VBUS on 67% of them (a signal on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 2, 3, 7 | Connected to: GND 100% | — |
| INpin 4, 5, 6 | Connected to: VBUS 67% · a signal 33% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Anyon e motherboard by byrantech, 100W-Charging-PCB by Redherring32, SCAN mainboard by jjsprandel and Unwired by NoxAevi.
The TVS2200DRV in open source designs
The gallery holds 7 open source boards using the TVS2200DRV from 6 GitHub repositories; a typical one measures about 100 × 61.1 mm and carries around 171 components.
71% use four copper layers or more, and 71% carry an open source license.
The most starred is Anyon e motherboard by byrantech.
Parts used alongside the TVS2200DRV
Microcontrollers on boards using the TVS2200DRV
What boards using the TVS2200DRV are built for
TVS2200DRV: common questions
Where can I find a TVS2200DRV reference design?
Each of the 7 boards on this page is a real design using the TVS2200DRV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TVS2200DRV IN pin connected?
The IN pins is tied to VBUS on 67% of them (a signal on 6). Counted from the KiCad layouts of 6 open source designs using the TVS2200DRV.
Which microcontrollers do boards using the TVS2200DRV use?
Most are built on ESP32 (2), Nordic nRF (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TVS2200DRV?
The median is 100 × 61.1 mm, and 29% are two-layer designs.
What is the most popular open source board using the TVS2200DRV?
By GitHub stars, Anyon e motherboard by byrantech, with 4,264 stars.
Can I simulate one of these boards using the TVS2200DRV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.