4 open source boards using the USB_Type-C
Real designs built with the USB_Type-C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
PSU
ThomasVDD
50 × 100 mm116 parts2LCustom license16ESP32
Bridge writer
tmcit-ararobo-2026a
100 × 65 mm226 parts4LMIT0STM32
Esc control hub
tmcit-ararobo-2026a
50 × 90 mm130 parts4LMIT0STM32
Robo con for-Wi-Fi
tmcit-ararobo-2026a
86 × 62 mm101 parts4LMIT0
The USB_Type-C in open source designs
The gallery holds 4 open source boards using the USB_Type-C from 4 GitHub repositories; a typical one measures about 68 × 77.5 mm and carries around 123 components.
75% use four copper layers or more, and 75% carry an open source license.
The most starred is PSU PCB by ThomasVDD.
Parts used alongside the USB_Type-C
Microcontrollers on boards using the USB_Type-C
What boards using the USB_Type-C are built for
USB_Type-C: common questions
Where can I find a USB_Type-C reference design?
Each of the 4 boards on this page is a real design using the USB_Type-C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the USB_Type-C use?
Most are built on STM32 (2), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the USB_Type-C?
The median is 68 × 77.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the USB_Type-C?
By GitHub stars, PSU PCB by ThomasVDD, with 16 stars.
Can I simulate one of these boards using the USB_Type-C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.